Usage; Listing The Contents Of The Password Cache - Netscape MANAGEMENT SYSTEM 6.1 - COMMAND-LINE Manual

Usage

You can use the
•

Listing the Contents of the Password Cache

• Generating a new Protection Key for the Password Cache-
• Adding a New Entry to the Password Cache
• Changing the Password of an Entry in the Password Cache
• Deleting an Entry From the Password Cache
The sections that follow explain how you can accomplish the above mentioned
tasks.
NOTE
Listing the Contents of the Password Cache
To list or view the contents of the password cache:
Open a command window.
1.
Go to this directory:
2.
At the prompt, enter the command below, substituting the variables with
3.
appropriate values:
the names known by Certificate Management System: for example, the
internal cryptographic module is known as internal, the internal LDAP
bind password is known as Internal LDAP Database, and the LDAP
publishing bind password for the Certificate Manager is known as CA
LDAP Publishing.
specifies the new password.
<password>
PasswordCache
The server queries the password cache only during start up, and
hence recognizes the changes you've made to the cache only if you
restart the server from the command line. If you left any of the
passwords blank, the server will prompt you to enter that during
startup and from then on stores it in the password cache.
<server_root>/cert-<instance_id>/config
utility for the following:
Chapter 3
Usage
Password Cache Utility 35