Table of Contents
Advertisement
Examples
The raw data stream is sent to standard output and is not interpreted in any way.
This can result in peculiar effects, such as sounds, flashes, and even crashes of the
command shell window. To output a basic, printable interpretation of the data, use
the
-h
You will notice that the page you retrieved looks incomplete in the browser. This is
because, by default, the tool closes down after the first connection is complete, so
the browser is not able to load images. To make the tool continue to accept
connections, switch on looping mode with the
The following examples show the output from commonly used combinations of
options.
Example 1
The
s
values in hex/ASCII format. The output is routed to a text file.
Command
ssltap.exe -sx -p 444 interzone.mcom.com:443 > sx.txt
Output
Connected to interzone.mcom.com:443
--> [
alloclen = 66 bytes
[ssl2]
118
Netscape Certificate Management System Command-Line Tools Guide • March 2002
option, or, if you are looking at an SSL connection, the
and
options in this example turn on SSL parsing and show undecoded
x
ClientHelloV2 {
version = {0x03, 0x00}
cipher-specs-length = 39 (0x27)
sid-length = 0 (0x00)
challenge-length = 16 (0x10)
cipher-suites = {
(0x010080) SSL2/RSA/RC4-128/MD5
(0x020080) SSL2/RSA/RC4-40/MD5
(0x030080) SSL2/RSA/RC2CBC128/MD5
(0x040080) SSL2/RSA/RC2CBC40/MD5
(0x060040) SSL2/RSA/DES64CBC/MD5
(0x0700c0) SSL2/RSA/3DES192EDE-CBC/MD5
(0x000004) SSL3/RSA/RC4-128/MD5
(0x00ffe0) SSL3/RSA-FIPS/3DES192EDE-CBC/SHA
(0x00000a) SSL3/RSA/3DES192EDE-CBC/SHA
(0x00ffe1) SSL3/RSA-FIPS/DES64CBC/SHA
(0x000009) SSL3/RSA/DES64CBC/SHA
(0x000003) SSL3/RSA/RC4-40/MD5
option.
-s
option.
-l
Advertisement
Table of Contents
