Advertisement

Model: TK-FDM106
Model: TK-FDM106
ENGLISH
Model: TK-FDM106
ENGLISH
Name and function of each part
Name and function of each part
ENGLISH
Keyboard
Keyboard
Name and function of each part
Keyboard
3
4
1 Power Switch
2 Battery lamp
If the battery is low during use, the lamp will
blink orange during keyboard input.
3 Spacebar
1
Insert the battery
Keyboard
Remove the battery cover.
Insert the battery.
Insert with the correct battery plus and
minus orientation.
Remove the receiver unit.
1 Power Switch
Re-attach the battery cover to its original state.
2 Battery lamp
3
Connecting to a PC
If the battery is low during use, the lamp will
Plug in here.
blink orange during keyboard input.
3 Spacebar
/M-TKFDM106/ELECOM01B
5
6
3
4 Battery cover
5 Battery-storage compartment
6 Receiver unit-storage compartment
* The receiver unit is kept here when exported.
Mouse
Remove the battery cover.
4
Insert the battery.
Insert with the correct battery plus and
minus orientation.
Re-attach the battery cover to its original state.
Start the PC.
Start the PC, and then wait for it to be ready to perform operations.
/M-TKFDM106/ELECOM01B
/M-TKFDM106/ELECOM01B
Manual
Mouse
2
1
9
10
7
7 Left button
8 Right button
9 Wheel
10
Battery lamp
When power is ON, the LED is lit red for a fixed time.
When remaining battery becomes low during use, the
LED blinks red.
2
Turning the Power On
Keyboard
3
Slide the power switch to the on position.
Regarding standby mode
5
The keyboard is usually in standby mode. Tapping
on any key will automatically wake the keyboard.
The keyboard will enter standby mode if there has
not been any input for a fixed period of time.
4 Battery cover
5 Battery-storage compartment
6 Receiver unit-storage compartment
* The receiver unit is kept here when exported.
Be sure to sufficiently check the connector
orientation and the insertion location.
If you feel a strong resistance when inserting
the USB connector, check that the shape
8
14
11
Optical sensor
12
Power Switch
13
Battery cover
14
Battery-storage compartment
15
Receiver unit-storage compartment
16
USB connector (male)
Mouse
6
The driver will be automatically installed. You
will then be able to use the keyboard and
mouse.
Man
Wireless Keyboard and Mouse Combo
Receiver unit
2
1
16
11
12
13
15
Please note that looking directly into the sensor
light may hurt your eyes.
Slide the power switch to the on position.
The red battery lamp lights up for a fixed period of time.
* When remaining battery is low, the LED blinks red for a
fixed time.
To wake the mouse from sleep mode.
To preserve battery life, the mouse will automatically
shift to sleep mode if left untouched for a fixed period
of time while the power is ON. To wake the mouse
from sleep mode, move the mouse.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TK-FDM106 and is the answer not in the manual?

Questions and answers

Summary of Contents for Elecom TK-FDM106

  • Page 1 Model: TK-FDM106 /M-TKFDM106/ELECOM01B Model: TK-FDM106 /M-TKFDM106/ELECOM01B ENGLISH Model: TK-FDM106 /M-TKFDM106/ELECOM01B Manual ENGLISH Wireless Keyboard and Mouse Combo Name and function of each part Name and function of each part ENGLISH Mouse Receiver unit Keyboard Keyboard Name and function of each part...
  • Page 2 Mouse Receiver unit 7 Left button Optical sensor Please note that looking directly into the sensor 8 Right button light may hurt your eyes. 9 Wheel Power Switch Battery lamp Battery cover When power is ON, the LED is lit red for a fixed time. When remaining battery becomes low during use, the Battery-storage compartment LED blinks red.
  • Page 3: Insert The Battery

    Insert the battery Keyboard Mouse Remove the battery cover. Remove the battery cover. Insert the battery. Insert the battery. Insert with the correct battery plus and Insert with the correct battery plus and minus orientation. minus orientation. Remove the receiver unit. Re-attach the battery cover to its original state.
  • Page 4: Turning The Power On

    Turning the Power On Keyboard Mouse Slide the power switch to the on position. Slide the power switch to the on position. The red battery lamp lights up for a fixed period of time. * When remaining battery is low, the LED blinks red for a Regarding standby mode fixed time.
  • Page 5: Specifications

    Connecting to a PC Slide the power switch to the on position. Slide the power switch to the on position. The red battery lamp lights up for a fixed period of time. Plug in here. * When remaining battery is low, the LED blinks red for a Regarding standby mode fixed time.
  • Page 6 Specifications Attach the battery cover.   Keyboard Number of keys 109 keys (Japanese layout) Key type Membrane Key pitch 19.0 mm Key stroke 3.5 mm Mouse Resolution 1600 dpi Read method Optical sensor method General specifications Compatible models Windows OS devices equipped with USB interface 7 (SP1)...
  • Page 7 Dimensions Keyboard (W × D × H) approx. 448 × 136 × 32 (mm) (The stand is not included.) approx. 448 × 136 × 41 (mm) (Using a stand) Mouse approx. 60 × 100 × 38 (mm) Receiver unit approx. 20 × 16 × 7 (mm) Weight Keyboard approx.
  • Page 8: Safety Precautions

    Safety Precautions Prohibited action Mandatory action Situation that needs attention WARNING If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, remove the receiver unit from the PC, and remove the battery from the product. If you continue to use the product under these conditions, it may cause a fire or electric shock.
  • Page 9: Cleaning The Product

    Civil Aeronautics Act. Remove the batteries from the keyboard and mouse before boarding and do not use after boarding. * ELECOM is not liable for any accident or any indirect or consequential damage incurred due to the failure of this product.
  • Page 10 A customer who purchases outside Japan should contact the local retailer in the country of purchase for enquiries. In “ELECOM CO., LTD. (Japan)”, no customer support is available for enquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available. Replacements will be made under stipulation of the Elecom warranty, but are not available from outside of Japan.

This manual is also suitable for:

M-tkfdm10601b

Table of Contents