Define-Perf-Bucket - Netscape ENTERPRISE SERVER 6.0 - NSAPI PROGRAMMER GUIDE Manual

Example:
Init fn=cindex-init widths=50,1,1,0
Init fn=cindex-init ignore=*private*
Init fn=cindex-init widths=22,0,0,50
See Also
index-common, find-index, home-page

define-perf-bucket

Applicable in -class directives.
Init
The
define-perf-bucket
use to measure the performance of SAFs in
on page 47 and the
service-dump
function is enabled.
perf-init
For more information about performance buckets, see the Netscape Enterprise Server
Performance Tuning, Sizing, and Scaling Guide.
Parameters
name
description
Example:
Init fn="define-perf-bucket" name="cgi-bucket" description="CGI
Stats"
See Also
perf-init
function creates a performance bucket, which you can
obj.conf
function). This function works only if the
A name for the bucket, for example cgi-bucket.
A description of what the bucket measures, for example CGI
Stats.
Chapter 7
see "The bucket Parameter,"
Syntax and Use of magnus.conf
Init SAFs
241