Related Manuals for Minelab PRO-FIND Series
Summary of Contents for Minelab PRO-FIND Series
- Page 1 Getting Started Guide Guía de Introducción Guia de Introdução Guide de démarrage Руководство по началу работы دليل بدء التشغيل 南指门入用使 Ажиллуулах заавар...
- Page 2 1. Pinpoint Detection Area 6. + (Plus) Button 1. Рабочая область для точечного поиска 6. Кнопка «+» (плюс) 1. Pinpoint Detection Area 6. + (Plus) Button 2. Probe Side Detection Area 7. – (Minus) Button 2. Боковая рабочая область 7. Кнопка «–» (минус) 3.
- Page 3 PRO‑FIND 35 which features an LED faster target recovery time! flashlight, adjustable sensitivity, Ferrous Tone ID Minelab’s DIF technology and more! significantly reduces A PRO‑FIND Series pinpointer is an interference with an operating metal detector...
-
Page 4: Power Off
Operating Instructions Power On With probe at least 300 mm / 1' away from metal objects, press the Power button (5). The unit will beep twice and the LED (3) will illuminate. When auto-calibration is complete, a short beep indicates that the pinpointer is ready to use. When a detection occurs, the vibration will †... -
Page 5: Audio Indication
Ferrous Tone ID To enable Ferrous Tone ID, hold the pinpointer away from metal objects, then press and hold + (6) for 3 seconds. There will one long beep. When the pinpointer is close to the target: Interrupted chirping tones upon detection indicate a ferrous target. - Page 6 +353 21 423 2352 +971 4 254 9995 minelab@minelab.ie minelab@minelab.ae Images and graphics are for illustration purposes only; product configuration and specifications may vary from those shown. | 4901-0223-8 Minelab®, PRO-FIND® and DIF™ are trademarks of Minelab Electronics Pty Ltd.
Need help?
Do you have a question about the PRO-FIND Series and is the answer not in the manual?
Questions and answers