Editing The Master Agent Config File; Defining Syscontact And Syslocation Variables - Netscape CONSOLE 6.0 - MANAGING SERVERS Manual

Configuring the Master Agent on UNIX
Edit the
3.
directory.
(Optional) Define
4.
Instructions for editing the
sysLocation

Editing the Master Agent Config File

The
CONFIG
will work. The manager value should be a valid system name or an IP address.
Here is an example of a basic
COMMUNITY
MANAGER

Defining sysContact and sysLocation Variables

You can edit the
sysLocation
section of the second version of SNMP). The value for
person in charge of the host system on which the master agent runs. The value for
sysLocation
The following example
variables. The strings for the variables in this example are enclosed in quotes. Any
string that contains spaces, line breaks, or tabs must be in quotes. Alternatively,
you can omit the quotes and specify the value of these whitespace characters in
hexadecimal notation.
222 Managing Servers with Netscape Console • December 2001
file located in the
CONFIG
sysContact
CONFIG
variables are detailed below.
file defines the community and manager with which the master agent
CONFIG
public
ALLOW ALL OPERATIONS
<your_manager_station_name>
SEND ALL TRAPS TO PORT 162
WITH COMMUNITY public
file to include initial values for the
CONFIG
variables (these variables are defined as part of MIB-II, the MIB
specifies a physical address where the host machine can be found.
file defines the
CONFIG
<server-root>/plugins/snmp/magt
and variables in the
sysLocation
file and defining the
file:
sysContact
sysContract
CONFIG
and
sysContact
and
sysContact
specifies the
and
sysLocation
file.