Chapter 5 Post Installation; Launching The Help System - Netscape DIRECTORY SERVER 6.0 Installation Manual

This chapter describes the post-installation procedures for launching the online
help and populating the directory tree.
This chapter has the following sections:
• Launching the Help System (page 65)
• Populating the Directory Tree (page 66)

Launching the Help System

The help system for Directory Server is dependent upon Netscape Administration
Server. If you are running Directory Server Console on a machine remote to
Administration Server, you will need to confirm the following:
Client IP address authorized on Administration Server. The machine running
Directory Server Console needs access to Administration Server. To configure
Administration Server to accept the client machine's IP address, do the following
in Administration Server:
Launch Administration Server Console. The console should be running on the
1.
same machine as Administration Server.
Click the Configuration tab, then click the Network tab.
2.
In the Connection Restrictions Settings, select "IP Addresses to Allow" from
3.
the pull down menu. Click Edit.
Edit the IP Addresses field to the following: *.*.*.*
4.
This allows all clients access to Administration Server.
Restart Administration Server. You can now launch the online help by clicking
5.
any of the Help buttons in the Directory Server Console.
Chapter 5
Post Installation
65