Section 2.18:Installation Complete
55
2.17 Installing Packages
At this point there is nothing left for you to do until all the packages have been installed (see Figure
2–22, Installing Packages). How quickly this happens depends on the number of packages you have
selected and your computer's speed.
Figure 2–22 Installing Packages
2.18 Installation Complete
Congratulations! Your Red Hat Linux 7.2 installation is now complete!
The installation program will prompt you to prepare your system for reboot.
Once the installation is complete, you must IPL (boot) from the DASD(s) where Red Hat Linux has
been installed. For example, on the 3270 console you may issue the command #cp i 200.