Iptstate; Ipw2200-Firmware; Iscsi-Initiator-Utils - Red Hat ENTERPRISE LINUX 5.5 - TECHNICAL NOTES Manual

Chapter 1. Package Updates

1.78. iptstate

1.78.1. RHBA-2009:1676: bug fix update
Note
This update has already been released (prior to the GA of this release) as FASTRACK
RHBA-2009:1676
errata
An updated iptstate package that resolves an issue is now available.
The iptstate utility displays the states held by your stateful firewall in a top-like manner.
This updated iptstate package fixes the following bug:
* iptstate used a curses output function in single-run mode where curses is not used. Running "ipstate
-s -S [address] -D [address]" caused ipstate to crash with a Segmentation Fault error. Note: running
the command without the single-run mode switch (-s) did not crash. With this update, the bug is fixed
and iptstate runs in single-run mode correctly, as expected.
All iptstate users should upgrade to this updated package, which resolves this issue.

1.79. ipw2200-firmware

1.79.1. RHEA-2010:0218: enhancement update
An enhanced ipw2200-firmware package is now available.
The ipw2200-firmware package contains the firmware files required by Intel PRO/Wireless 2200
network adapters.
The enhancement contains new open source 802.11a/bg drivers, which are compatible with ipw2200
drivers in the latest Red Hat Enterprise Linux kernels.
Users with hardware containing Intel PRO/Wireless 2220 network adapters are advised to install this
enhancement.

1.80. iscsi-initiator-utils

1.80.1. RHBA-2010:0078: bug fix update
Note
This update has already been released (prior to the GA of this release) as errata
RHBA-2010:0078
529
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=474381
530
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=494492
82
528
531
529
(BZ#474381 )
530
(BZ#494492 )