CLOROX Total 360 ProPack Quick Start Manual

Please read operator's manual before use.
U S A G E G U I D E S
Clorox Total 360
®
Please read operator's manual before use.
Remove gross soil
1
using normal cleaning
protocols. Then close area
to the public by placing
"Cleaning in Progress" sign
outside.
Sa fe ty Da ta
Sa fe ty Da ta
Put on the appropriate
2
Sh ee ts
Sh ee ts
Sa fe ty Da ta
Sa fe ty Da ta PPE. Refer to product-
Sh ee ts
Sh ee ts
specific Clorox Safety Data
Sa fe ty Da ta Sa fe ty Da ta Sa fe ty Da ta S D S
S D S
Sh ee ts
Sh ee ts Sh ee ts
Sheets for specific PPE
S D S S D S
Sa fe ty Da ta Sa fe ty Da ta
Sa fe ty Da ta
requirements.
Sh ee ts Sh ee ts
Sh ee ts
S D S
S D S S D S
1
1
S D S S D S
S D S
1 1
1
1 1
1
1 1
Mount desired Clorox®
3
solution in backpack
with bottle opening below
dispensing tube and connect
dispensing cap to bottle.
Remove spray wand from
4
strap and thread extension
S a f e t y D a t a
S a f e t y D a t a
cord through the strain relief.
Plug into wall.
S h e e t s
S h e e t s
Note: Do not tie extension cord
and power cord together. Doing
S a f e t y D a t a
S a f e t y D a t a
so will result in damage to cords.
S h e e t s
S a f e t y D a t a
S a f e t y D a t a S a f e t y D a t a
S D S
S D S
S h e e t s
S h e e t s S h e e t s
S D S
S a f e t y D a t a S a f e t y D a t a
S a f e t y D a t a
S h e e t s
S h e e t s
S D S
1
1
S D S
1
1
1
1 1
1
1
1
ProPack Quick Start Guide
®
S h e e t s
S D S
S h e e t s
S D S S D S
S D S
S D S
Put on backpack.
5
Check harness is on
Remove gross soil
proper setting for your height.
1
Fasten straps securely and
adjust if necessary.
Note: Follow the backpack
using normal cleaning
harness adjustment instructions
in the operator's manual.
protocols. Then close area
With wand firmly in
6
hand, press and release
to the public by placing the main power button.
Main power button will
illuminate blue and air flow
"Cleaning in Progress" sign will begin.
outside.
Press the spray button
7
once to initiate spraying.
The first time you spray, point
the wand into a corner or drain,
press the spray button, and wait
up to 25 seconds to generate a
steady flow. Press once to stop.
Spray the desired surfaces
8
from 2–4 feet away using
a slow, sweeping motion.
Put on the appropriate
Refer to specific Clorox
2
product label for contact times
and usage instructions.
PPE. Refer to product-
specific Clorox Safety Data
Sheets for specific PPE
requirements.
Mount desired Clorox®
3
solution in backpack
with bottle opening below
dispensing tube and connect
dispensing cap to bottle.
Remove spray wand from
4
strap and thread extension
cord through the strain relief.
Plug into wall.
Note: Do not tie extension cord
and power cord together. Doing
so will result in damage to cords.
When finished spraying,
9
press the main power
button to turn off. Unfasten
safety straps, remove
backpack, and unplug power
cord. Reopen the area and
move to the next location.
When ready to store
10
the device, secure the
extension cord and spray
wand using the straps on
the side of the backpack.
®
Clorox Total 360 is a registered trademark in the U.S.A. NI-52343
®