Sorting Lvm Reports - Red Hat ENTERPRISE LINUX 5.1 - LVM ADMINISTRATION Manual

LV VG
lvol0 new_vg -wi-a- 52.00M
# lvs --segments
LV VG
lvol0 new_vg -wi-a-

4.9.3. Sorting LVM Reports

Normally the entire output of the lvs, vgs, or pvs command has to be generated and stored internally
before it can be sorted and columns aligned correctly. You can specify the --unbuffered argument
to display unsorted output as soon as it is generated.
To specify an alternative ordered list of columns to sort on, use the -O argument of any of the reporting
commands. It is not necessary to include these fields within the output itself.
The following example shows the output of the pvs command that displays the physical volume name,
size, and free space.
# pvs -o pv_name,pv_size,pv_free
PV PSize
/dev/sdb1 17.14G 17.14G
/dev/sdc1 17.14G 17.09G
/dev/sdd1 17.14G 17.14G
The following example shows the same output, sorted by the free space field.
# pvs -o pv_name,pv_size,pv_free -O pv_free
PV PSize
/dev/sdc1 17.14G 17.09G
/dev/sdd1 17.14G 17.14G
/dev/sdb1 17.14G 17.14G
The following example shows that you do not need to display the field on which you are sorting.
# pvs -o pv_name,pv_size -O pv_free
PV PSize
/dev/sdc1 17.14G
/dev/sdd1 17.14G
/dev/sdb1 17.14G
To display a reverse sort, precede a field you specify after the -O argument with the - character.
# pvs -o pv_name,pv_size,pv_free -O -pv_free
PV PSize
/dev/sdd1 17.14G 17.14G
/dev/sdb1 17.14G 17.14G
Attr LSize Origin Snap%
Attr #Str Type
1 linear 52.00M
PFree
PFree
PFree
Move Log Copy%
SSize
Sorting LVM Reports
47