Red Hat DIRECTORY SERVER 7.1 - PLUG-IN PROGRAMMERS Manual page 606

Parameters for Error Logging
Parameter ID
SLAPI_LOG_TRACE
SLAPI_LOG_PACKETS
SLAPI_LOG_ARGS
SLAPI_LOG_CONNS
SLAPI_LOG_BER
SLAPI_LOG_FILTER
SLAPI_LOG_CONFIG
SLAPI_LOG_ACL
SLAPI_LOG_SHELL
SLAPI_LOG_PARSE
SLAPI_LOG_HOUSE
SLAPI_LOG_REPL
SLAPI_LOG_CACHE
SLAPI_LOG_PLUGIN
SLAPI_LOG_TIMING
SLAPI_LOG_ACLSUMMARY
604 Red Hat Directory Server Plug-in Programmer's Guide • May 2005
Description
This message is written to the error log if the log level
setting "Trace function calls" is selected. This severity
level is typically used to indicate what function is being
called.
This message is written to the error log if the log level
setting "Packet handling" is selected.
This message is written to the error log if the log level
setting "Heavy trace output" is selected.
This message is written to the error log if the log level
setting "Connection management" is selected.
This message is written to the error log if the log level
setting "Packets sent/received" is selected.
This message is written to the error log if the log level
setting "Search filter processing" is selected.
This message is written to the error log if the log level
setting "Config file processing" is selected.
This message is written to the error log if the log level
setting "Access control list processing" is selected.
This message is written to the error log if the log level
setting "Log communications with shell back-ends" is
selected.
This message is written to the error log if the log level
setting "Log entry parsing" is selected.
This message is written to the error log if the log level
setting "Housekeeping" is selected.
This message is written to the error log if the log level
setting "Replication" is selected.
This message is written to the error log if the log level
setting "Entry cache" is selected.
This message is written to the error log if the log level
setting "Plug-ins" is selected. This severity level is
typically used to identify messages from server
plug-ins.
This message is written to the error log if the log level
setting "Log timing" is selected.
This message is written to the error log if the log level
setting "Log ACL summary" is selected.