Red Hat DIRECTORY SERVER 7.1 - GATEWAY CUSTOMIZATION Manual page 30

HTTP Server Configuration
Adding the following CGI directories (under Program Management).
2.
Prefix:
CGI Directory:
(On Windows, add them as shell CGI directories.)
Adding an additional Document directory (under Content Management).
3.
Prefix:
Directory:
Changing permissions of the cookie directory (required for UNIX only).
4.
The configuration procedures outlined in this section assume that a Red Hat Enterprise
Server is installed and configured to communicate with Directory Server. For Red Hat
Enterprise Server documentation, check this site:
http://www.redhat.com/docs/manuals/dir-server/
For configuring other HTTP servers, follow the documentation that came with the
product.
To configure the gateway to work with Red Hat Enterprise Server, follow the instructions
below:
Add an additional CGI directory.
1.
Adding an additional CGI directory is necessary to make the gateway's CGI programs
available. For additional information, see
From the Class Manager for the Red Hat Enterprise Server:
a.
b.
c.
d.
34 Red Hat Directory Server Gateway Customization Guide • April 2005
/clients/dsgw/bin
serverRoot/clients/dsgw/bin
/clients
serverRoot/clients
http://enterprise.netscape.com/docs/enterprise/611/admin/esp
.
rgrm.htm#21309
Select Programs > CGI Directory.
In the URL Prefix field, enter the URL prefix to use:
/clients/dsgw/bin
In the CGI Directory field, enter this (replace
directory):
serverRoot/clients/dsgw/bin
Click OK, then Save and Apply.
with your installation
serverRoot