The Dm-Multipath Configuration File; Configuration File Overview - Red Hat DEVICE-MAPPER MULTIPATH 4.6 Configuration And Administration Manual

Table of Contents

Advertisement

Chapter 4.

The DM-Multipath Configuration File

By default, DM-Multipath provides configuration values for the most common uses of
multipathing. In addition, DM-Multipath includes support for the most common storage arrays
that support DM-Multipath. The default configuration values and the supported devices can be
found in the
/usr/share/doc/device-mapper-multipath-0.4.5/multipath.conf.defaults
file.
You can override the default configuration values for DM-Multipath by editing the
/etc/multipath.conf
not supported by default to the configuration file. This chapter provides information on parsing
and modifying the
multipath.conf

• Configuration file overview

• Configuration file blacklist
• Configuration file defaults
• Configuration file multipaths
• Configuration file devices
In the multipath configuration file, you need to specify only the sections that you need for your
configuration, or that you wish to change from the default values specified in the
multipath.conf.defaults
environment or for which you do not need to override the default values, you can leave them
commented out, as they are in the initial file.
The configuration file allows regular expression description syntax.
An annotated version of the configuration file can be found in
/usr/share/doc/device-mapper-multipathd-0.4.5/multipath.conf.annotated
1. Configuration File Overview
The multipath configuration file is divided into the following sections:
devnode_blacklist
Listing of specific devices that will not be considered for multipath. By default all devices are
blacklisted. Usually the default
defaults
General default settings for DM-Multipath.
multipaths
Settings for the characteristics of individual multipath devices. These values overwrite what
configuration file. If necessary, you can also add a storage array that is
file. It contains sections on the following topics:
file. If there are sections of the file that are not relevant to your
devnode_blacklist
section is commented out.
.
15

Advertisement

Table of Contents
loading

Table of Contents