Basic Safety Instructions Always read through and comply with the following safety instructions! All plants and locations of the Rohde & Schwarz group of companies make every effort to keep the safety standards of our products up to date and to offer our customers the highest possible degree of safety. Our products and the auxiliary equipment they require are designed, built and tested in accordance with the safety standards that apply in each case.
Page 4
Basic Safety Instructions Tags and their meaning The following signal words are used in the product documentation in order to warn the reader about risks and dangers. indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Page 5
Basic Safety Instructions Electrical safety If the information on electrical safety is not observed either at all to the extent necessary, electric shock, fire and/or serious personal injury or death may occur. 1. Prior to switching on the product, always ensure that the nominal voltage setting on the product matches the nominal voltage of the AC supply network.
Page 6
Basic Safety Instructions 14. Use suitable overvoltage protection to ensure that no overvoltage (such as that caused by a bolt of lightning) can reach the product. Otherwise, the person operating the product will be exposed to the danger of an electric shock. 15.
Page 7
Basic Safety Instructions Repair and service 1. The product may be opened only by authorized, specially trained personnel. Before any work is performed on the product or before the product is opened, it must be disconnected from the AC supply network.
Page 8
Informaciones elementales de seguridad 2. Handles on the products are designed exclusively to enable personnel to transport the product. It is therefore not permissible to use handles to fasten the product to or on transport equipment such as cranes, fork lifts, wagons, etc. The user is responsible for securely fastening the products to or on the means of transport or lifting.
Page 9
Informaciones elementales de seguridad Se parte del uso correcto del producto para los fines definidos si el producto es utilizado conforme a las indicaciones de la correspondiente documentación del producto y dentro del margen de rendimiento definido (ver hoja de datos, documentación, informaciones de seguridad que siguen). El uso del producto hace necesarios conocimientos técnicos y ciertos conocimientos del idioma inglés.
Page 10
Informaciones elementales de seguridad Palabras de señal y su significado En la documentación del producto se utilizan las siguientes palabras de señal con el fin de advertir contra riesgos y peligros. PELIGRO identifica un peligro inminente con riesgo elevado que provocará...
Page 11
Informaciones elementales de seguridad Seguridad eléctrica Si no se siguen (o se siguen de modo insuficiente) las indicaciones del fabricante en cuanto a seguridad eléctrica, pueden producirse choques eléctricos, incendios y/o lesiones graves con posible consecuencia de muerte. 1. Antes de la puesta en marcha del producto se deberá comprobar siempre que la tensión preseleccionada en el producto coincida con la de la red de alimentación eléctrica.
Page 12
Informaciones elementales de seguridad 12. Si un producto se instala en un lugar fijo, se deberá primero conectar el conductor de protección fijo con el conductor de protección del producto antes de hacer cualquier otra conexión. La instalación y la conexión deberán ser efectuadas por un electricista especializado. 13.
Page 13
Informaciones elementales de seguridad 5. Ciertos productos, como p. ej. las instalaciones de radiocomunicación RF, pueden a causa de su función natural, emitir una radiación electromagnética aumentada. Deben tomarse todas las medidas necesarias para la protección de las mujeres embarazadas. También las personas con marcapasos pueden correr peligro a causa de la radiación electromagnética.
Page 14
Informaciones elementales de seguridad 6. En caso de falta de estanqueidad de una celda, el líquido vertido no debe entrar en contacto con la piel ni los ojos. Si se produce contacto, lavar con agua abundante la zona afectada y avisar a un médico.
Contents HD Radio Test Waveforms Contents 1 Preface....................5 Documentation Overview.....................5 Conventions Used in the Documentation..............6 2 Getting Started..................7 3 Contents of the DVDs................8 4 System Requirements................9 5 Installation Instructions...............10 6 Enabling the R&S SMBV to play the HD Radio waveforms files .......................11 7 Enabling the R&S SMU/SMJ to play the HD Radio waveforms files...
Preface HD Radio Test Waveforms Documentation Overview 1 Preface 1.1 Documentation Overview The user documentation for the R&S SMx/AFQ consists of the following parts: ● Online Help system on the instrument, ● "Quick Start Guide" printed manual, ● Documentation CD-ROM with: Online help system (*.chm) as a standalone help, Operating Manuals for base unit and options, Service Manual,...
Preface HD Radio Test Waveforms Conventions Used in the Documentation Service Manual This Service Manual is available in PDF format - in printable form - on the Documentation CD-ROM delivered with the instrument. It describes how to check compliance with rated specifications, on instrument function, repair, troubleshooting and fault elimination.
Getting Started HD Radio Test Waveforms 2 Getting Started The HD Radio test waveforms files (*.wv) are provided on a DVD set and can be played on the Arbitrary Waveform Generator (ARB) of the instruments listed under chap- ter 4, "System Requirements", on page 9.
System Requirements HD Radio Test Waveforms 4 System Requirements The waveforms files can be played on the instruments listed below. The instrument must be equipped with the options listed in the table 4-1. ● R&S SMU200A Vector Signal Generator ● R&S SMBV100A Vector Signal Generator ●...
Installation Instructions HD Radio Test Waveforms 5 Installation Instructions The files are encrypted for reasons of protection. Copying or recording the waveforms files with the intention of using them on another playback device is prohibited! If the waveforms files are supplied together with a new instrument, the waveforms files and the license key are already installed.
HD Radio Test Waveforms Enabling the R&S SMBV to play the HD Radio waveforms files 6 Enabling the R&S SMBV to play the HD Radio waveforms files To play the HD Radio waveforms files on your instrument, proceed as described below. 1.
Page 24
HD Radio Test Waveforms Enabling the R&S SMBV to play the HD Radio waveforms files SCPI command: SOUR:BB:ARB:WAV:SEL 'hdd/ARB/HDRadio/IB_FMr208c_e0wfc204.wv' The name of the selected file and the clock frequency are displayed in the "ARB" dialog. 5. Set the "State" to ON to enable ARB modulation. SCPI command: SOUR:BB:ARB:STAT ON The R&S SMBV process the selected waveform file.
HD Radio Test Waveforms Enabling the R&S SMU/SMJ to play the HD Radio waveforms files 7 Enabling the R&S SMU/SMJ to play the HD Radio waveforms files To play the HD Radio waveforms files on your instrument, proceed as described below. 1.
Page 26
HD Radio Test Waveforms Enabling the R&S SMU/SMJ to play the HD Radio waveforms files 4. Set the "State" to ON to enable ARB modulation. SCPI command: SOUR:BB:ARB:STAT ON The R&S Signal Generator process the selected waveform file. Manual 1171.6450.32 ─ 03...
HD Radio Test Waveforms Enabling the R&S AFQ to play the HD Radio waveforms files 8 Enabling the R&S AFQ to play the HD Radio waveforms files To play the HD Radio waveforms files on your instrument, connect the R&S AFQ to a signal generator as shown on the figure 8-1.
Page 28
HD Radio Test Waveforms Enabling the R&S AFQ to play the HD Radio waveforms files SCPI command: SOUR:BB:ARB:WAV:SEL 'd/ARB/HDRadio/IB_FMr208c_e0wfc204.wv' The name of the selected file and the clock frequency are displayed in the "ARB" dialog. 5. Set the "State" to ON to enable ARB modulation. SCPI command: SOUR:BB:ARB:STAT ON The R&S AFQ process the selected waveform file.
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Category 9 Available Waveform Files This chapter contains complete lists of the available waveform files, ordered by different criteria: ● Category, on page 17 ● File name, on page 23 ●...
Page 30
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Category Waveform file Description Size Disk Subdir. IB_AMr208_e0wfb134.wv MA1, analog source = pulsed USASI, BER Pat- 383.9 tern, C/No = 90 dB-Hz, hybrid upper adjacent, D/ U = -6 dB IB_AMr208_e0wfb135.wv MA1, analog source = pulsed USASI, BER Pat- 383.9...
Page 31
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Category Waveform file Description Size Disk Subdir. IB_AMr208_e0wfc34.wv MA1, Stereo digital (right only) / mono analog, 4- kHz tone, clean channe l– fixed phase discontinu- ity when file wraps around IB_AMr201_e0wfc52.wv MA1, Music, Blend Control Bits change from 01 to 33.8...
Page 32
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Category Waveform file Description Size Disk Subdir. IB_FMr208c_e0wfc10.wv MP1, 1 kHz tone (right channel only), clean chan- 16.9 IB_FMr208e_e0wfc12.wv MP1, 8 kHz tone (left channel only), clean channel 16.9 IB_FMr208e_e0wfc13.wv MP1, 8 kHz tone (right channel only), clean chan- 16.9...
Page 33
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Category Waveform file Description Size Disk Subdir. IB_FMr208c_e0wfc27.wv MP1, Stereo 1-kHz tone with calibrated analog and 16.9 digital audio levels, clean channel, TXGain = +7 dB IB_FMr208c_e0wfc28.wv MP1, Stereo 1-kHz tone with calibrated analog and 16.9 digital audio levels, clean channel, TXGain = -8 dB IB_FMr208j_e0wfa104.wv...
Page 34
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Category Waveform file Description Size Disk Subdir. IB_FMr208d_e0wfa143.wv MP3, 3 programs; Prog 1: on P1, 52 kbit/s Prog 4: 506.3 on P3, 24 kbit/s for 90 seconds then off for 90 sec- onds Prog 6: on P1, 44 kbit/s IB_FMr220a_e0wfc100.wv MP3, 3 programs Analog: 1 kHz tone ;...
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by File Name Waveform file Description Size Disk Subdir. IB_FMr230a_e0wfr1010.w MP1, used for Test 6h - Maximum length PSD, 67.5 Long everything IB_FMr230a_e0wfr1011.w MP1, used for Test 6o-1, 2-character call sign dis- 67.5 play IB_FMr230a_e0wfr1012.w...
Page 36
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by File Name Waveform file Description Size Disk Subdir. IB_AMr208_e0wfb111.wv MA1, analog source = pulsed USASI, BER Pat- 383.9 tern, C/No = 74 dB-Hz IB_AMr208_e0wfb113.wv MA1, analog source = pulsed USASI, BER Pat- 383.9 tern, C/No = 76 dB-Hz IB_AMr208_e0wfb119.wv...
Page 37
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by File Name Waveform file Description Size Disk Subdir. IB_AMr208_e0wfc24.wv MA1, digital audio = 1kHz. Tone (Left only), analog audio = silence, C/No = 79 dB-Hz, with SIS & PAD IB_AMr208_e0wfc26.wv Analog AM only, continuous 1kHz tone, clean channel...
Page 38
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by File Name Waveform file Description Size Disk Subdir. IB_FM_e0_CW_dc.wv Unmodulated RF carrier for FM mode. Single RF 33.8 carrier, frequency offset = 0 Hz IB_FMr201_e0wfc52.wv MP1, Music, Blend Control Bits change from 01 to 540.0 IB_FMr208c_e0wfa05.wv MP1, Audio Mix, clean Channel, with SIS and PAD 506.3...
Page 39
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by File Name Waveform file Description Size Disk Subdir. IB_FMr208c_e0wfc27.wv MP1, Stereo 1-kHz tone with calibrated analog and 16.9 digital audio levels, clean channel, TXGain = +7 dB IB_FMr208c_e0wfc28.wv MP1, Stereo 1-kHz tone with calibrated analog and 16.9 digital audio levels, clean channel, TXGain = -8 dB...
Page 40
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by File Name Waveform file Description Size Disk Subdir. IB_FMr208j_e0wfa109.wv MP3, 3 programs;Prog 1: on P1, 52 kbit/s;Prog 6: 506.3 on P1, 44 kbit/s;Prog 4: on P3, 24 kbit/s IB_FMr208j_e0wfa11.wv MP1, Audio Mix, clean Channel (same as a05 vec- 506.3...
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Disk Number Waveform file Description Size Disk Subdir. IB_FMr230a_e0wfr1008.w MP1, used for Test 6h - Maximum length PSD, 67.5 Long comment IB_FMr230a_e0wfr1009.w MP1, used for Test 6h - Maximum length PSD, 67.5 Long commercial IB_FMr230a_e0wfr1010.w...
Page 42
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Disk Number Waveform file Description Size Disk Subdir. IB_FMr208c_e0wfc206.wv MP1, analog source = audio mix, BER Pattern, Cd/ 506.3 No = 57 dB-Hz, urban fast fading IB_FMr208c_e0wfc227.wv MP1, analog source = audio mix, BER Pattern, Cd/ 506.3 No = 62 dB-Hz, urban fast fading, hybrid lower 1st adjacent, D/U = +6 dB...
Page 43
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Disk Number Waveform file Description Size Disk Subdir. IB_AMr208_e0wfc26.wv Analog AM only, continuous 1kHz tone, clean channel IB_AMr208_e0wfb124.wv MA3, BER Pattern, C/No = 63 dB-Hz 383.9 IB_AMr208_e0wfb126.wv MA3, BER Pattern, C/No = 65 dB-Hz 383.9 IB_AMr208_e0wfb130.wv MA3, BER Pattern, C/No = 61 dB-Hz...
Page 44
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Disk Number Waveform file Description Size Disk Subdir. IB_FMr208c_e0wfc09.wv MP1, 1 kHz tone (left channel only), clean channel 16.9 IB_FMr208c_e0wfc10.wv MP1, 1 kHz tone (right channel only), clean chan- 16.9 IB_FMr208d_e0wfc542.wv MP5, BER Pattern, Cd/No = 57 dB-Hz...
Page 45
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Disk Number Waveform file Description Size Disk Subdir. IB_FMr208j_e0wfa104.wv MP1, 2 programs;Prog 1: on P1, 65 kbit/s;Prog 4: 506.3 on P1, 31 kbit/s IB_FMr208j_e0wfa105.wv MP1, 3 programs;Prog 1: on P1, 52 kbit/s;Prog 6: 506.3 on P1, 22 kbit/s;Prog 4: on P1, 22 kbit/s IB_FMr208j_e0wfa106.wv...
Page 46
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Disk Number Waveform file Description Size Disk Subdir. IB_FMr208d_e0wfa143.wv MP3, 3 programs; Prog 1: on P1, 52 kbit/s Prog 4: 506.3 on P3, 24 kbit/s for 90 seconds then off for 90 sec- onds Prog 6: on P1, 44 kbit/s IB_AMr208c_e0wfa11.wv MA1 Audio mix, AWGN.
Page 47
Available Waveform Files HD Radio Test Waveforms Waveform Files List, Ordered by Disk Number Waveform file Description Size Disk Subdir. IB_FMr230a_e0wfr1009.w MP1, used for Test 6h - Maximum length PSD, 67.5 Long commercial IB_FMr230a_e0wfr1010.w MP1, used for Test 6h - Maximum length PSD, 67.5 Long everything IB_FMr230a_e0wfr1011.w...
Index HD Radio Test Waveforms Index ARB ..............11, 13, 15 Documentation Overview ........... 5 HD Radio System Requirements ........9 Installation Instructions ............. 10 K352 HD Radio test waveforms ......... 9 Preset ..............11, 13, 15 Required options ..............9 System Requirements ............
This manual is also suitable for:
Smbv seriesSmj seriesSmu seriesAfq-k352Smbv-k352Smj-k352...
Show all
Need help?
Do you have a question about the AFQ Series and is the answer not in the manual?
Questions and answers