Turtle Beach Ear Force X42 User Manual page 5

XBOX 360 Setup
®
XBOX 360 (Newer Models)
1. Connect the Digital Optical Cable
NOTE: Remove the protective caps from each end of the
optical cable before inserting it into the sockets.
2. Connect the Transmitter Power
DIGITAL OUT
1
2
5
XBOX 360 (Older Models)*
1. Connect the Digital Optical Cable*
(Requires XBOX 360 HDMI Audio Adapter, sold separately)
NOTE: Remove the protective caps from each end of the optical cable
before inserting it into the sockets.
2. Connect the Transmitter Power
1
2
* XBOX 360 HDMI Audio Adapter cable required (sold separately). If your
HDTV has an optical AUDIO OUT jack, you can use it to connect the optical
cable to the transmitter.
3. Insert the Headset Batteries as shown:
Right Ear Cup:
To remove
the battery
cover, slide
downward.
CAUTION: Be
sure to insert
batteries as
shown.
3
4. Insert the Microphone Boom:
Insert the boom so that the holes in
the mic casing and the marker on
the jack are facing your mouth.
4
5. Turn on the headset by pressing
and holding the power button
until you hear a tone, then release.
EFFECTS
ON - BASS BOOST - OFF
POWER
5
6