Quality Clever QCP00800 Manual

TO INSTALL YOUR MAT HANGER
1. Choose a location on your wall or side of your desk. Draw a light pencil outline
at the rough location of the Hanger Hole.
2. Install the two Hanger Knobs on a level line over the Hanger Hole location with
the screw centers separated by 2 7/8" (7.3cm).
3. When hanging, the hanger hole will stretch slightly over the Hanger Knobs. This
ensures a secure fit.
3 "
7/8
(9.8cm)
17 "
1/2
(44.4cm)
CLEANING AND CARE
• Clean with mild soap and warm water,
rinse, then dry with a rag or paper towel.
• Do not expose to excessive heat.
• Do not puncture, scratch, scrape, cut, or
tear the gel foam material.
WARNING:
- This is not a toy.
- This is not a safety device.
- Contains small parts- Choking Hazard.
- Keep away from Children.
- Do not use for anything other than its
intended purpose.
-
STANDING DESK ANTI-FATIGUE MAT
FITS PERFECTLY CONVENIENT HANDLE & HANGER STAND PAIN-FREE
2 "
1/16
(5.2cm)
2 "
7/8
(7.3cm)
STANDING DESK ANTI FATIGUE MAT
HANGER HOLE
+ +
LEVEL LINE
29 "
1/4
(74.3cm)
MODEL NUMBER: QCP00800
CONTENTS:
QTY 1 ANTI-FATIGUE MAT
QTY 2 HANGER KNOBS & SCREWS
Thank you for your purchase!
For Technical Support, Feedback,
or Customer Service
• Phone: +1-888-861-1704
Quality Clever is a Registered Trademark
MADE IN TAIWAN
-