Advertisement
Quick Links
Advertisement
Related Manuals for Foxydry TOWER
Summarization of Contents
Tools Needed for Installation
Measure Tape
Essential tool for accurate measurements during installation.
Ladder
Required for reaching higher installation points safely.
Pencil
Used for marking drilling points on the wall.
Drill
For creating holes for wall mounting.
Wrench
Tool for tightening nuts and bolts.
Star Screwdriver
Tool for driving specific screw types.
Level
Ensures accurate horizontal and vertical alignment during mounting.
Warnings and Safety Precautions
Product Suitability and Liability
Not a toy, not for children; liability for misuse.
Weight Limits and Overload Danger
Specifies max load per rack; warns against exceeding.
Professional Installation Recommended
Advise to use qualified and experienced personnel.
Wall Plug Compatibility
Ensure supplied plugs suit wall material or use alternatives.
Correct Wall Mounting Procedure
Ensure secure fixing before completing assembly.
Securing the Control Chain
Fasten the chain retainer to the wall for safety.
Contents of the Box - FOXYDRY WALL
Main Components (Parts A-F)
Identifies key structural parts like rails and plates.
Accessory Bags (Sacchettini 1-3)
Lists all hardware and small parts included.
Contents of the Box - FOXYDRY WALL PLUS
Main Components (Parts J-K)
Lists drying rails and side plates for this model.
Accessory Bags (Sacchettini 1-2)
Details hardware and small parts for the Wall Plus.
Contents of the Box - FOXYDRY TOWER
Main Components (Parts N-O)
Lists drying rails and side plates for the Tower.
Accessory Bags (Sacchettini 1-2)
Details hardware and small parts for the Tower.
Dimensions and Wall Preparation
Maximum Space Occupied Dimensions
Frontal and lateral space requirements.
Wall Hole Placement Diagrams
Guides for drilling on the wall for WALL models.
Installation Procedures - Main Structure
Attaching the Clutch Holder
Fix the clutch holder to the upper square rail.
Attaching the Upper Square Rail to the Wall
Mark, drill, and fix the main rail.
Attaching the Side Square Rails
Fix side rails to the upper wall brackets.
Securing Lower Side Rails and Alignment
Fix bottom rails and ensure parallelism.
Inserting and Fixing Side Rails
Mount rack, attach side rails to wall plugs.
Installation Procedures - Drying Rack Mechanism
Assembling the Drying Rack Grid
Connect the drying bars to the frame.
Connecting the Clutch Mechanism
Insert the clutch with chain into its holder.
Ensuring Secure Clutch Fastening
Verify the clutch is properly seated and locked.
Routing the Control Cords
Thread the cords through pulleys and tubes.
Securing Cord Ends and Level Adjustment
Lock cords with barrels and adjust for level.
Installation Procedures - Usage and Additional Racks
Operating the Drying Rack (UP/DOWN)
How to lift and lower the rack using the chain.
Cord Winding Direction Warning
Avoid winding cords incorrectly on the clutch.
Securing the Control Chain to the Wall
Attach the chain retainer clip to the wall.
Using the Rack Closing Hook
Lock the grill in the vertical position.
Assembling Additional Rack (WALL PLUS)
Install an extra rack for the WALL PLUS model.
Inserting Additional Rack (WALL PLUS)
Fit the extra rack into the vertical tubes.
Assembling Additional Rack (TOWER)
Install an extra rack for the TOWER model.
Positioning and Securing TOWER Additional Rack
Mount and fasten the TOWER's extra rack.
Need help?
Do you have a question about the TOWER and is the answer not in the manual?
Questions and answers