Related Manuals for Freund HSK8-P3 EVO2
Summarization of Contents
About the Hand-Skinner Manual
Target Group for the Manual
Identifies the intended users of the operating manual, including slaughtering facility staff and butchers.
Liability and Warranty Information
Outlines the manufacturer's liability limitations and warranty terms for the equipment.
Storing the Operating Manual
Provides guidance on where and how to store the operating manual for accessibility.
FREUND Assistance Portal
Details access to the online customer portal for spare parts, assembly instructions, and CE declarations.
General Warnings and Precautions
Highlights potential dangers and emphasizes the importance of observing safety information.
Layout Elements and Conventions
Explains the structure of the manual, including enumerations, sequences, and references.
Understanding Safety Signs
Details warning signs and mandatory safety signs used in the manual and on the equipment.
Interpreting Symbols in the Manual
Explains the meaning of various symbols used to convey information about the machine and procedures.
Ensuring Safety with the Hand-Skinner
Site Operator's Safety Responsibilities
Defines the site operator's obligations regarding personnel, training, and workplace safety.
Employee's Safety Responsibilities
Outlines the duties of operating staff and qualified personnel concerning machine operation and safety.
Required Personal Protective Equipment
Specifies the personal protective equipment (PPE) that staff must wear during operation.
Safety-Related Machine Components
Identifies critical safety components of the HSK8-P5, HSK8-P3_evo2, and HSK8-P3 models.
Understanding Residual Risks
Details inherent dangers that cannot be eliminated by design and how to minimize them.
Intended Use of the Hand-Skinner
Describes the specific applications for which the FREUND Hand-Skinner is designed.
Prohibited Improper Uses
Lists uses that are considered contrary to the intended purpose and pose safety risks.
Technical Details of the Hand-Skinner
HSK8-P5 Model Specifications
Provides technical data including weight, length, vibration, and noise emission for the HSK8-P5.
HSK8-P3_evo2 Model Specifications
Details technical specifications for the HSK8-P3_evo2, including weight and performance metrics.
HSK8-P3 Model Specifications
Lists technical data for the HSK8-P3, covering weight, length, vibration, and noise levels.
Pneumatic Motor P5 Technical Data
Provides dimensions, drive type, weight, pressure, and consumption for the P5 pneumatic motor.
Compressed-air Motor P3_evo2 Specs
Details dimensions, drive type, weight, pressure, and consumption for the P3_evo2 motor.
Pneumatic Motor P3 Technical Data
Outlines specifications for the P3 pneumatic motor, including dimensions and operating parameters.
Head Piece Dimensions and Speed
Specifies the weight, dimensions, roller speed, cutting width, and depth of the head piece.
Scraper Component Details
Describes the scraper, its function, and the importance of its installation during operation.
Available Optional Accessories
Lists optional accessories that can be purchased to enhance the functionality of the hand-skinner.
Required Operating Materials: Compressed Air
Specifies the quality requirements for compressed air used to operate the machine.
Required Operating Materials: Lubricants
Details the importance of lubricant quality and the use of NSF-H1 certified lubricants.
Scope of Delivery and Order Numbers
Lists the items included in the scope of delivery and their corresponding order numbers.
Installation and Commissioning Procedures
Safety Information for Installation
Highlights risks associated with unqualified personnel and sharp machine parts during installation.
PPE for Installation and Commissioning
Specifies the necessary personal protective equipment for safe installation and setup.
Connecting the Service Unit Correctly
Provides instructions and cautions for connecting the pneumatic service unit to the machine.
Connecting the Hand-Skinner Machine
Details the process of connecting the hand-skinner machine to the air supply system.
Procedure for Inserting the Blade
Explains the steps required to safely insert the cutting blade into the hand-skinner.
Operating the Hand-Skinner Safely
Safety Information During Operation
Warns about risks from unqualified personnel and sharp parts during operation.
PPE for Safe Machine Operation
Specifies personal protective equipment required for safe operation of the hand-skinner.
Performing Daily Safety Checks
Outlines the essential checks to perform daily before operating the machine.
Step-by-Step Machine Operation
Provides instructions on how to operate the hand-skinner, including pressure considerations.
Cleaning and Disinfection Guidelines
Safety Information for Cleaning
Highlights safety precautions related to unqualified personnel and sharp parts during cleaning.
PPE for Cleaning and Disinfection
Specifies personal protective equipment needed for safe cleaning and disinfection processes.
Carrying Out Cleaning and Disinfection
Details the procedure for cleaning and disinfecting the machine, including detergent use and water pressure.
Maintenance and Repair Work Procedures
Safety Information for Maintenance
Warns about risks from unqualified personnel and sharp parts during maintenance and repair.
PPE for Maintenance and Repair
Specifies personal protective equipment required for safe maintenance and repair activities.
Recommended Lubricants for Maintenance
Lists the recommended lubricants for refilling and topping up the machine.
Scheduled Maintenance Tasks
Provides a schedule for regular maintenance jobs based on intervals and operating hours.
Checking the Compressed-Air Motor
Recommends procedures for checking the compressed-air motor, advising professional service.
Available Service Packages
Highlights service packages offered by FREUND for inspection and maintenance of the pneumatic motor.
Troubleshooting Common Issues
Safety Information for Troubleshooting
Emphasizes safety precautions regarding unqualified personnel and sharp machine parts during troubleshooting.
PPE for Troubleshooting Activities
Specifies personal protective equipment required for safe troubleshooting operations.
Overview of Possible Faults and Remedies
Lists common faults, their possible causes, and recommended remedies for the hand-skinner.
Disposal and Recycling of the Machine
Disassembling and Disposing of the Machine
Provides steps for safely disassembling and disposing of the machine in accordance with environmental regulations.
Disposing of Packaging Material
Instructs on the proper and environmentally friendly disposal of packaging materials.
Need help?
Do you have a question about the HSK8-P3 EVO2 and is the answer not in the manual?
Questions and answers