1. Manuals
  2. Brands
  3. Palo Alto Network Manuals
  4. Network Hardware
  5. PA-440
  6. Hardware reference manual

Palo Alto Network PA-440 Hardware Reference Manual

Next-gen firewall
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PA-400 Series Next-Gen Firewall
Hardware Reference
docs.paloaltonetworks.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PA-440 and is the answer not in the manual?

Questions and answers

Related Manuals for Palo Alto Network PA-440

Summary of Contents for Palo Alto Network PA-440

  • Page 1 PA-400 Series Next-Gen Firewall Hardware Reference docs.paloaltonetworks.com...
  • Page 2 Alto Networks. A list of our trademarks can be found at www.paloaltonetworks.com/company/ trademarks.html. All other marks mentioned herein may be trademarks of their respective companies. Last Revised April 1, 2025 PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 3: Table Of Contents

    PA-400 Series Front Panel..................... 14 PA-400 Series Back Panel.......................29 Install the PA-400 Series Firewall............... 33 Install the PA-400 Series Firewall on a Flat Surface............34 Install the PA-400 Series Firewall on a Wall..............36 Install the PA-400 Series Firewall in a 19-inch Equipment Rack........44 Install the PA-400 Series Firewall Using the PAN-PA-400-RACKTRAY...44...
  • Page 4 Table of Contents PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 5: Before You Begin

    Before You Begin Read the following topics before you install or service a Palo Alto Networks next-generation ® firewall or appliance.The following topics apply to all Palo Alto Networks firewalls and appliances except where noted. • Upgrade/Downgrade Considerations for Firewalls and Appliances •...

  • Page 6: Upgrade/Downgrade Considerations For Firewalls And Appliances

    If the value the downgrade. If the is less than 20, then value is less than 20, contact support for then contact support for assistance. assistance. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 7: Tamper Proof Statement

    • The integrity of the warranty label on the firewall or appliance is not compromised. (PA-7000 Series firewalls only) PA-7000 Series firewalls are modular systems and therefore do not include a warranty label on the firewall. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 8: Third-Party Component Support

    Before You Begin Third-Party Component Support Before you consider installing third-party hardware, read the Palo Alto Networks Third-Party Component Support statement. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 9: Product Safety Warnings

    • I/O ports are intended for intra-building connections only and not intended for OSP (Outside Plant) connections or any network connections subject to external voltage surge events. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 10 Toutefois, vous devez le faire dans les 45 secondes et vous ne pouvez remplacer qu’un tiroir à la fois, sinon le circuit de protection thermique arrêtera le pare-feu. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 11 à accès limité uniquement. Une zone à accès limité correspond à une zone dans laquelle l’accès n’est autorisé au personnel (de service) qu'à l'aide d'un outil spécial, PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc.
  • Page 12 • A suitably-rated DC mains disconnect device must be provided as part of the building installation. French Translation: Un interrupteur d'isolement suffisant doit être fourni pendant l'installation du bâtiment. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 13: Pa-400 Series Firewall Overview

    (HA), 5G capability for select models, and Power Over Ethernet (PoE) support in the PA-415 and PA-445. All PA-400 Series firewalls except for the PA-410 can make use of dual power adapters for power redundancy (second power adapter sold separately). The PA-400 Series firewall enables you to secure your organization through advanced visibility and control of applications, users, and content.

  • Page 14: Pa-400 Series Front Panel

    PA-400 Series Firewall Overview PA-400 Series Front Panel View the front panel components of your PA-400 Series firewall. • PA-410 • PA-415-5G • PA-415 and PA-445 • PA-455 • PA-455-5G • PA-440, PA-450, and PA-460 The following image shows the front panel of the PA-410 and the table describes each front panel component.
  • Page 15 The firewall also uses this port for management services, such as retrieving licenses and updating threat and application signatures. Ethernet Ports Seven RJ-4510/100/1000Mbps PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 16 PA-400 Series Back Panel. USB ports Two USB ports for debugging and administration only. Use one of these ports to bootstrap the firewall. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 17 (Micro USB) firewall using a standard Type- A USB-to-micro USB cable. The console connection provides access to firewall boot messages, the Maintenance Recovery Tool PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 18 150W power adapter and can utilize an optional second power adapter for power redundancy. LED status indicators Four LEDs that indicate the status of the firewall hardware PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 19 Description components (see Interpret the LEDs on a PA-400 Series Firewall). The front panels of the PA-415 and PA-445 firewalls are visually different but feature the same components. The following image shows the front panel of the PA-415 and the table describes each front panel component.
  • Page 20 The combo ports support 10/100/1000Mbps speeds. While facing the front panel of the firewall, the upper SFP/ RJ45 combo ports (marked as management) are used for PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 21 Three LEDs that indicate the status of the firewall hardware components (see Interpret the LEDs on a PA-400 Series Firewall). The following image shows the front panel of the PA-455 and the table describes each front panel component. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc.
  • Page 22 Description LED status indicators Four LEDs that indicate the status of the firewall hardware components (see Interpret the LEDs on a PA-400 Series Firewall). USB port USB port for debugging and administration only. Use this port to bootstrap the firewall.
  • Page 23 Ethernet (PoE) ports. They can be configured to transfer power to a connected device. Ground studs Use a dual screw ground lug to connect the firewall to PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 24 LED status indicators Eight LEDs that indicate the status of the firewall hardware components (see Interpret the LEDs on a PA-400 Series Firewall). SIM slot cover After removing the slot cover, install up to two nano SIMs to enable mobile network connectivity.
  • Page 25 You can set the link speed and duplex mode or choose auto- negotiate. Ports 5, 6, 7, and 8 are Power over Ethernet (PoE) ports. They can be configured to PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 26 Use this Ethernet 1Gbps port to access the management web interface and perform administrative tasks. The firewall also uses this port for management services, such as retrieving licenses PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 27 USB-to-serial converter. Use the following settings to configure your terminal emulation software to connect to the console port: • Data rate: 9600 • Data bits: 8 PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 28 (see Interpret the LEDs on a PA-400 Series Firewall). To view system firmware versions for any of the PA-400 Series firewalls, use the following CLI command: admin@PA-400> show system firmware PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc.

  • Page 29: Pa-400 Series Back Panel

    PA-400 Series Firewall Overview PA-400 Series Back Panel View the back panel components of your PA-400 Series firewall. • PA-410 • PA-415-5G • PA-415 and PA-445 • PA-455 • PA-455-5G • PA-440, PA-450, and PA-460 The following image shows the back panel of the PA-410 and the table describes each back panel component.
  • Page 30 The back panels of the PA-415 and PA-445 firewalls are visually different but feature the same components. The following image shows the back panel of the PA-415 and the table describes each back panel component. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 31 The back panels of the PA-440, PA-450, and PA-460 firewalls are identical. The following image shows the back panel of the PA-440 and the table describes each back panel component. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc.
  • Page 32 Use only the PA-400 Series external power adapters provided by Palo Alto Networks. To view system firmware versions for any of the PA-400 Series firewalls, use the following CLI command: admin@PA-400> show system firmware PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc.

  • Page 33: Install The Pa-400 Series Firewall

    Install the PA-400 Series Firewall The PA-400 Series next-generation firewall ships with the hardware required to install the firewall on a flat surface or on a wall. For select models, you can also order a rack mount kit to install the firewall in a 19-inch equipment rack.

  • Page 34: Install The Pa-400 Series Firewall On A Flat Surface

    Install the PA-400 Series Firewall Install the PA-400 Series Firewall on a Flat Surface The PA-440, PA-450, and PA-460 firewalls ship with rubber “feet” attached to each corner of the device. As pictured below, the PA-440, PA-450, and PA-460 can be situated on a flat surface both horizontally and vertically.
  • Page 35 Install the PA-400 Series Firewall The PA-410, PA-415, PA-415-5G, PA-455, PA-455-5G, and PA-445 have rubber feet installed on their bottom side so they can only be installed in a horizontal position. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 36: Install The Pa-400 Series Firewall On A Wall

    Install the PA-400 Series Firewall Install the PA-400 Series Firewall on a Wall Install a PA-400 Series firewall on a drywall or plywood wall using the wall-mount kit as described in the following procedure. If you have a firewall that supports multi-band antennas, make sure that you read how to install antennas on the 5G firewall before continuing with this procedure.
  • Page 37 #6-32 screws. Then attach the wall mount to the wall using four screws that are appropriate for your wall. (PA-440, PA-450, and PA-460) (PA-410, PA-415, PA-415-5G, PA-455-5G, and PA-445) PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 38 Install the PA-400 Series Firewall (PA-455) PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 39 Next, loop the two Velcro straps through the side openings on the wall mount and over the power PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc.
  • Page 40 Make sure to align the cable tie with the notches in the bracket to prevent the power cord from falling out. Next, loop the two Velcro straps through the side openings on PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc.
  • Page 41 Install the PA-400 Series Firewall the wall mount and over the power adapter. Lastly, loop the Velcro straps back over the top of the power adapter to secure it into place. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 42 After you secure the power adapter to the bracket, mount the bracket next to the firewall using wood or drywall screws as appropriate. (PA-440, PA-450, and PA-460) (PA-415, PA-415-5G, PA-455, PA-455-5G, and PA-445) (PA-410) PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 43 Install the PA-400 Series Firewall STEP 6 | (PA-415, PA-415-5G, PA-440, PA-445, PA-450, PA-455, PA-455-5G, and PA-460) You can install an optional second power adapter next to the first power adapter. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 44: Install The Pa-400 Series Firewall In A 19-Inch Equipment Rack

    Install the PA-400 Series Firewall Install the PA-400 Series Firewall in a 19-inch Equipment Rack The PAN-PA-400-RACKTRAY enables you to install one or two PA-440, PA-450, or PA-460 firewalls in a four-post 19" rack. The installation hardware consists of a metal base and two rails that can be expanded to include up to two firewalls and two PSUs.
  • Page 45 Align the slotted holes in the adjustable mounting bracket to the holes on the rear of the equipment frame. The mounting rails are designed for equipment frames that are 26” to 32” deep. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 46 STEP 3 | Secure the rails to the equipment frame with mounting screws (not provided) compatible with your equipment frame. Tighten the screws to their recommended torque value. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 47 (PA-440, PA-450, and PA-460 firewalls) (PA-415, PA-415-5G, PA-455, PA-455-5G, and PA-445 firewalls) STEP 5 | While holding the firewall, carefully flip the mounting tray over to reveal its underside. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 48 Secure the firewall in place using three of the provided #6-32 x 3/16” Long Flathead screws. (PA-440, PA-450, and PA-460 firewalls) (PA-415, PA-415-5G, PA-455, PA-455-5G, and PA-445 firewalls) PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 49 Repeat Steps 4 through 6 for the second firewall. Place the second firewall adjacent to the first firewall in the mounting tray. STEP 8 | Flip the mounting tray back into an upright position. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 50 Slide the mounting tray into the rails previously fixed to the equipment rack. Stop when the front flange on the mounting tray is flush with the front of the rail. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc.
  • Page 51 3 screws each (not provided). The screws must be compatible with your equipment frame. (PA-440, PA-450, and PA-460 firewalls) (PA-415, PA-415-5G, PA-455, PA-455-5G, and PA-445 firewalls) PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 52 Install the PA-400 Series Firewall STEP 14 | Proceed to Connect Power to a PA-400 Series Firewall PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 53: Install Antennas On The Pa-400 Series 5G Firewall

    Install the PA-400 Series Firewall Install Antennas on the PA-400 Series 5G Firewall The PA-415-5G and PA-455-5G firewalls support four multi-band antennas. The following procedure describes how to install the to the four antenna SMA (F) connectors on the firewall.
  • Page 54 Install the PA-400 Series Firewall 2. Rotate the antennas at 180-degree movement about the SMA connectors. Tighten the antennas by hand. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...
  • Page 55 Do not point the antennas towards one another or place them close to one another. Ensure that power cables do not cross over the antennas as this can cause signal quality distortion and antenna performance degradation. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 56: Insert A Sim Card Into A Pa-400 Series Firewall

    Install the PA-400 Series Firewall Insert a SIM Card into a PA-400 Series Firewall The PA-415-5G and PA-455-5G firewalls support two nano SIM slots to enable mobile network connectivity. STEP 1 | Remove the SIM cover. PA-415-5G The SIM cover is on the back of the firewall. Unfasten the two M3 screws on the SIM cover using a type one Phillips screwdriver.
  • Page 57 After inserting the SIM, place the SIM cover back onto the device and fasten the screw(s). To eject the SIM from the device, gently push the SIM inward using a finger tip. Release the finger tip and pull out the SIM. PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 58: Set Up A Connection To The Firewall

    Overview. You can also ™ bring the PA-400 Series firewall online in standard mode. See the instructions below to learn how to boot in ZTP or standard mode. If you have already booted up the firewall and selected the wrong mode, you must perform a factory reset or private-data-reset before continuing.
  • Page 59 Install the PA-400 Series Firewall STEP 4 | Power on the firewall. See Connect Power to a PA-400 Series Firewall to learn how to connect power to the firewall. • (Standard mode) Using your terminal emulator, watch for the following CLI prompt as the...
  • Page 60 Install the PA-400 Series Firewall PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 61: Connect Power To A Pa-400 Series Firewall

    Connect Power to a PA-400 Series Firewall All PA-400 Series firewalls, except for the PA-455-5G, are powered by an external power adapter that converts an AC power source to DC power. The PA-455-5G firewalls operates on AC power. All firewalls, except for the PA-410, support power redundancy.

  • Page 62: Connect Power To A Pa-400 Series Firewall

    Connect Power to a PA-400 Series Firewall Connect Power to a PA-400 Series Firewall The following procedure describes how to connect power to a PA-415, PA-415-5G, PA-440, PA-445, PA-450, PA-455, PA-455-5G, and PA-460 firewall. • The PA-415, PA-415-5G, PA-440, PA-445, PA-450, PA-455, and PA-460 firewalls use DC power.
  • Page 63 Connect Power to a PA-400 Series Firewall STEP 3 | Connect the connector from the power adapter into the PWR 1 port on the firewall and tighten the connector nut to secure the cable to the firewall. The power adapter inputs for the PA-440, PA-450, and PA-460 are on the back panel of the device.
  • Page 64 Connect Power to a PA-400 Series Firewall STEP 5 | (Optional for PA-415, PA-415-5G, PA-440, PA-445, PA-455-5G, PA-450, and PA-460) Plug the connector from a second power adapter (purchased separately) into the PWR 2 port and plug the connector into a power source.

  • Page 65: Connect Power To A Pa-410 Firewall

    Connect Power to a PA-400 Series Firewall Connect Power to a PA-410 Firewall The following procedure describes how to connect power to a PA-410 firewall. To avoid injury to yourself or damage to your Palo Alto Networks hardware or the data ®...
  • Page 66 Connect Power to a PA-400 Series Firewall PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 67: Service The Pa-400 Series Firewall Hardware

    Service the PA-400 Series Firewall Hardware The following topics describe how to interpret the PA-400 Series status LEDs and how to replace a PA-400 Series power adapter. The power adapter is the only serviceable component on the PA-400 Series firewall.

  • Page 68: Interpret The Leds On A Pa-400 Series Firewall

    Service the PA-400 Series Firewall Hardware Interpret the LEDs on a PA-400 Series Firewall The following table describes how to interpret the status LEDs on the PA-400 Series firewalls. The PA-410, PA-415, and PA-445 firewall only have PWR, STAT, and ALM front panel LEDs.
  • Page 69 Service the PA-400 Series Firewall Hardware Description PA-455-5G, and PA-445) TEMP • Green—The firewall temperature is normal. (Temperature) • Yellow—The firewall temperature is outside tolerance levels. • (PA-410, PA-440, • Green—The firewall is powered on. PA-450, and • Off—The firewall is not powered on or an error has occurred...
  • Page 70 Service the PA-400 Series Firewall Hardware Description (PA-415-5G and • Off—The modem is disabled. PA-455-5G only) The PA-455-5G has two cellular LEDs — 1 and 2. Each corresponds to one of two active 5G modems in the firewall. Ethernet port LEDs •...

  • Page 71: Replace A Power Adapter On A Pa-400 Series Firewall

    The PA-410 can only operate on one power adapter. The CLI cannot be used to determine the status of the PA-400 Series firewalls power adapter. To manually interpret the status of the power adapter, verify that your power cable connections are secure and that the LED on the power adapter is on.
  • Page 72 Pull the cable away from the firewall to remove it. The power adapter inputs for the PA-440, PA-450, and PA-460 are on the back panel of the device. The power adapter inputs for the rest of the PA-400 Series firewalls are on the front panel of the device.
  • Page 73 Service the PA-400 Series Firewall Hardware STEP 2 | Connect a new power adapter. (PA-415, PA-415-5G, PA-440, PA-445, PA-450, PA-455, PA-455-5G, and PA-460) Connect the DC connector from the new power adapter to the power input (PWR 1 or PWR 2) port on the firewall and, if applicable, tighten the connector nut to secure the cable to the firewall.
  • Page 74 Service the PA-400 Series Firewall Hardware PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 75: Pa-400 Series Firewall Specifications

    PA-400 Series Firewall Specifications The following topics describe the PA-400 Series firewall hardware specifications. For feature, capacity, and performance information, refer to the datasheet. • Physical Specifications • Electrical Specifications • Environmental Specifications • Antenna Specifications • Miscellaneous Specifications...

  • Page 76: Physical Specifications

    PA-400 Series Firewall Specifications Physical Specifications The following table describes PA-400 Series firewall physical specifications. Specification Value Rack units and dimensions PA-410 • Height: 1.73”, Width: 9.53”, Depth: 6.60” (Height: 4.39 cm, Width: 24.21 cm, Depth: 16.76 cm) PA-415 and PA-415-5G •...
  • Page 77 • Firewall weight—10.75 lbs (4.88 kg) • Shipping weight—17.25 lbs (7.82 kg) PA-440, PA-450, and PA-460 • Firewall weight—5.0 lbs (2.27 kg) • Shipping weight—7.8 lbs (3.54 kg) PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 78: Electrical Specifications

    PA-400 Series Firewall Specifications Electrical Specifications The following table describes PA-400 Series firewall electrical specifications. Specification Value Power adapter The PA-400 Series firewalls operate on DC power (except for the PA-455-5G, which operates on AC power) that is provided by the external power adapter (provided).
  • Page 79 • Total PoE budget allowed (across all ports) —91W PA-455-5G • Supported on ports 5, 6, 7, and 8 • Maximum reserved power (per port)—60W • Total PoE budget allowed (across all ports)—151W PA-400 Series Next-Gen Firewall Hardware Reference 2025 Palo Alto Networks, Inc. ©...

  • Page 80: Environmental Specifications

    PA-400 Series Firewall Specifications Environmental Specifications The following table describes PA-400 Series firewall environmental specifications. Specification Value Operating temperature range PA-410, PA-440, PA-450, PA-455, PA-455-5G, and PA-460 • 32°F to 104°F (0° to 40°C) PA-415, PA-415-5G, and PA-445 • 32°F to 113°F (0° to 45°C) Non-operating temperature •...

  • Page 81: Antenna Specifications

    PA-400 Series Firewall Specifications Antenna Specifications The following table describes the PA-400 Series firewall antenna specifications. Specification Value Antennas PA-415-5G and PA-455-5G • Four 5G multi-band antennas 5G NR Sub-6GHz (FR1): n2, n3, n5, n66, n71, Supported radio frequency (RF) bands...

  • Page 82: Miscellaneous Specifications

    PA-400 Series Firewall Specifications Miscellaneous Specifications The following table describes PA-400 Series firewall miscellaneous specifications. Specification Value Storage capacity PA-415, PA-415-5G, PA-440, PA-445, PA-450, PA-455, PA-455-5G, and PA-460 • One 128 GB eMMC PA-410 • One 64 GB eMMC Mean time between failures (MTBF)

  • Page 83: Pa-400 Series Firewall Compliance Statements Overview

    Our products meet standards for product safety and electromagnetic compatibility when used for their intended purpose.To view compliance statements for the PA-400 Series firewall, see PA-400 Series Firewall Compliance Statements...

  • Page 84: Pa-400 Series Firewall Compliance Statements

    PA-400 Series Firewall Compliance Statements Overview PA-400 Series Firewall Compliance Statements The following lists the PA-400 Series firewall hardware compliance statements: • BSMI EMC Statement: (PA-415 and PA-445) This is a Class A product. When used in a residential environment it may cause radio interference. In this case, the user will be required to take adequate measures.
  • Page 85 PA-400 Series Firewall Compliance Statements Overview • KCC: This equipment is an electromagnetic compatible device for business purposes (Class A). The provider or user should be aware that the equipment is intended for use outside the home. • TUV: Product Ambient Temperature: •...
  • Page 86 PA-400 Series Firewall Compliance Statements Overview television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Increase the separation between the equipment and receiver.

Table of Contents