Basic Functions Of Your Blu-Ray Disc Player; Before Playing - Samsung BD P4600 - Blu-Ray Disc Player User Manual

basic functions of your
blu-ray disc player
This section introduces basic playback functions and playback by disc type.

BeFore PLayING

Turn on your TV and set it to the correct Video Input (the input the Blu-ray Disc Player is connected to).
~
~ If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the PoWer button, this screen comes up:
If you want to select a language, press a NuMBer button.
(This screen will only appear when you plug in the player for
the first time.) If the language for the startup screen is not
set, the settings may change whenever you turn the power
on or off. Therefore, make sure that you select the language
you want to use. Once you select a menu language, you
can change it by pressing the SkIP (]) button on the top
panel of the unit for more than 5 seconds with no disc in the
unit. Then the MENU LANGUAGE SELECTION window
appears again where you can reset your preferred
language.
When you connect Blu-ray Disc Player and Samsung TV with Anynet+ feature(HDMI-CEC) using HDMI
cable, the MENU LANGUAGE SELECTION window may disappear quickly. If you want to select
language, please disable a Anynet+ feature(HDMI-CEC) on your TV.
M
`
Discs which can be played on this player (For the following discs, the ability to play back may depend on
recording conditions.)
• BD-ROM
• DVD-R
• MKV
• The unit may not play certain CD-RW/CD-R and DVD-R due to the disc type or recording conditions.
`
Discs which cannot be played on this player.
• HD DVD
• DVD-RW(VR mode)
• DVD-ROM/PD/MV-Disc, etc • Super Audio CD(except CD layer)
• CVD/CD-ROM/CDV/CD-G/CD-I/LD (CDGs play audio only, not graphics.)
`
If the player is left in the stop mode more than 5 minutes without any user interface, a screen saver will
appear on your TV. If the player is left in the screen saver mode for more than 15 minutes, the power will
automatically turn off except during playback of a CD-DA (Automatic Power-Off Function).
`
If no buttons are pressed on the unit or remote control for more than 5 minutes when the unit is in Pause
mode, operation will stop (except for some Blu-ray Discs).
`
Blu-ray is a new and evolving format. Accordingly, disc compatibility issues with new and existing format
discs are possible. Not all discs are compatible and not every disc will playback.
For additional information, refer to the Disc Type and Characteristics and Compliance and Compatibility
Notice sections of this Manual. If you encounter compatibility problems, please contact SAMSUNG customer
care center.
• BD-RE
• DVD-RW (V mode)
• MP4
• DVD+RW/+R
• 3.9 GB DVD-R Disc for Authoring.
MENU LANGUAGE SELECTION
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
Macrovision: BBSXXX
• BD-R
• CD-RW/CD-R • DivX
• DVD-RAM
English _