Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SOLIS 6000
Summary of Contents for SOLIS 6000
- Page 1 FLEXI VAC CLEANER 350 Type 6000 User manual...
-
Page 2: Table Of Contents
IMPORTANT SAFETY PRECAUTIONS CONTENTS APPLIANCE DESCRIPTION CONTROL BUT TONS BEFORE FIRST USE ASSEMBLY INSTALLATION OF THE WALL MOUNT USING THE APPLIANCE CLEANING AND CARE CLEARING BLOCKAGES STORAGE ACCESSORIES AND SPARE PARTS TECHNICAL SPECIFICATIONS TROUBLESHOOTING DISPOSAL 2 YEAR GUARANTEE SOLIS CUSTOMER SERVICE... -
Page 3: General Safety Instructions
I N T E N D E D U S E • This appliance is intended for dry vacuuming. • Only use the appliance as described in this manual. • This appliance is intended to be used in household and similar applications such as: –... - Page 4 • Children must be supervised to ensure that they not play with the appliance. • Keep the appliance and the power cord away from children and pets. Safety instructions regarding installation WARNING • Keep the original packaging in a safe place so that you may use it in the event that transportation or shipping of the product becomes necessary.
- Page 5 Never reach for an appliance that has fallen into water or other liquids. Always use dry rubber gloves to pull the plug before taking it out. Do not start using it again before having it checked for functionality and safety by Solis or a service centre authorized by Solis. •...
- Page 6 • Never apply any fragrance or scented product to the filters, as this poses a fire hazard. • Never use the appliance on a wet surface. • Never store the appliance vertically unsupervised and not secured. • Never use the appliance to collect objects that are flammable, burning or smoking.
-
Page 7: Vco N T E N T S
• Never immerse the appliance in water or other liquids and do not put it in the dishwasher. • Do not use abrasive chemical cleaning agents such as ammonia, acid or acetone when cleaning the appliance. This can damage the appliance. •... -
Page 8: Appliance Description
A P P L I A N C E D E S C R I P T I O N 1 2 3 0 0 q w e Roller brush Crevice tool Floor brush lid Wall mount Floor brush Battery Cleaning tool Plugs Large HEPA filter... -
Page 9: Control But Tons
CO N T R O L B U T TO N S Battery level indicator Power button Cleaning mode indicator Filter release button Floor brush blocked indicator Filter lid Dustbin lid latch Minimum power Dustbin Medium power Charging indicator Maximum power Battery release button Air duct blocked indicator Dustbin release button... -
Page 10: Before First Use
B E F O R E F I R S T U S E To prepare the appliance before first use and when the battery is empty: Plug the power cable of the adapter into the power port of the battery w. Plug the other end of the adapter into a power outlet. -
Page 11: Assembly
A S S E M B LY To assemble the appliance: Slide the battery into the main body y. Open the filter lid and place the small HEPA filter 8. Never use the appliance without the dustbin and filters in place. Close the filter lid k. - Page 12 5. Place the large HEPA filter into the large HEPA filter holder 7. 6. Place the large HEPA filter holder with the large HEPA filter into the dustbin s. Optionally, insert the tube to the main body y. 8. Insert the floor brush 3, brush tool 6, or crevice tool into the tube or the main body y.
-
Page 13: Installation Of The Wall Mount
I N S TA L L AT I O N O F T H E WA L L M O U N T To install the wall mount: Place the holes for the wall mount 85 cm above the floor, so that the floor brush reaches the floor when the tube is fully extended. -
Page 14: Using The Appliance
U S I N G T H E A P P L I A N C E Press the power button to switch on the appliance. The control panel lights up and indicates the following: Indicator Symbol on the Description of the indicator main body Battery level The battery level indicator... -
Page 15: Cleaning And Care
C L E A N I N G A N D C A R E To clean the dustbin and filters: Switch off the appliance. Press the dustbin lid latch to open the dustbin and empty out the dust (see image F). - Page 16 Remove the large HEPA filter holder by turning the large HEPA filter holder counterclockwise and pull out the large HEPA filter (see image G). Empty the dustbin after each use. Do not exceed the maximum mark. To ensure optimum suction power, clean the HEPA filter at least weekly and replace it every 3 months.
- Page 17 5. Press the filter release button to remove the filter lid k. 6. Remove the small HEPA filter (see image H). Remove any loose dust from the large HEPA filter and the small HEPA filter with the cleaning tool 4. 8.
- Page 18 15. Close the dustbin (see image I). Do not put any parts in the dishwasher. To clean the floor brush:...
- Page 19 Switch off the appliance. Press the lock on/off switch to remove the floor brush lid 2. Take the roller brush out of the floor brush (see image J). Remove hair, dust and dirt from the floor brush using the cleaning tool and a dry cloth.
-
Page 20: Clearing Blockages
ACC E S S O R I E S A N D S PA R E PA R T S The following accessories and spare parts are available for the FLEXI VAC CLEANER 350: Article number... -
Page 21: Technical Specifications
T E C H N I C A L S P E C I F I C AT I O N S Model-No. Type 6000 Voltage / frequency 100 – 240 V~ / 50 – 60 Hz Output 350 W Battery 25.9 mAh / 2200 V Dimensions (W ×... -
Page 22: Disposal
For commercial use, the guarantee lasts for 12 months. The detailed guarantee conditions are available at www.solis.com. S O L I S C U S TO M E R S E R V I C E... - Page 24 Solis of Switzerland Ltd Solis-House • CH-8152 Glattbrugg • Switzerland www.solis.ch • www.solis.com Please visit us at www.solis.com...
Need help?
Do you have a question about the 6000 and is the answer not in the manual?
Questions and answers