Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VOLTA A Series
Summarization of Contents
pGD1 Control Terminal Overview
General Description of pGD1 Terminal
Describes the pGD1 control terminal, its display, and 6 buttons for navigation and parameter adjustment.
Navigating pGD1 Menus and Screens
Explains how to navigate through user and installer menus, sub-menus, and screens to adjust parameters.
Adjusting On-Screen Parameters with pGD1
Provides a step-by-step guide for changing parameters on the screen using the control buttons.
VOLTA W/VOLTA A Heat Pumps and Block Management
Main Screen Guide for Heat Pumps
Details the fields on the main screen, providing information about heat pump operation.
Active Components Identification
Lists and explains icons representing activated components of the heat pump and their functions.
Heat Pump Operating Modes Explained
Describes the various operating modes of the heat pump, indicated by icons, and their functionalities.
Heat Pump Operation Program
Explains how the heat pump operation program determines which operating modes can be activated.
Understanding Heat Pump Status
Indicates heat pump availability to service various heat pump functions.
USER Menu Guide for Heat Pumps
ON/OFF Menu Operations
Allows turning the equipment on/off, activating emergency status, and choosing the operation program.
Schedule Menu Configuration
Covers date/time settings, daylight savings, HP schedule, and holiday calendar for programming operations.
Heating Menu Settings
Configuration of heating service, including setpoints, buffer, groups, and room terminals.
Cooling Menu Settings
Configuration of cooling service, including cut-off temperatures, buffer, groups, and room terminals.
DHW and Legionella Protection Menu
Settings for Domestic Hot Water (DHW) production, recirculation, and Legionella protection.
Pool Menu Configuration
Configuration options for pool heating, including setpoints, HTR system, and auxiliary pool functions.
e-MANAGER Menu Setup
Enables and configures surplus electricity control for the e-MANAGER system.
Information Menu Access
Provides access to various information screens about heat pump status, components, and operating data.
Alarms Menu and Handling
Displays active alarms, recurring alarms, and lock-down status; allows resetting alarms.
INSTALLER Menu Guide for Heat Pumps
Language Selection in Installer Menu
Allows selecting the display language for the heat pump or VOLTA S-SUPERVISOR controller.
Installer Settings Configuration
Configure language display options, units for temperature/pressure, and energy meter evaluation criteria.
Selecting the Heat Pump Model
Selects the heat pump model and unit type (IDU/ODU) for correct operation and configuration.
Brine System Configuration
Selects brine system type (Geothermal, Aerothermal, Hybrid) and configures aerothermal collector parameters.
Heating System Configuration
Enables heating service, selects connection type, configures heating groups, and sets heating limits.
Cooling System Configuration
Enables active/passive cooling, configures cooling groups, and sets cooling system parameters.
DHW Production Service Configuration
Enables DHW production, recirculation, configures DHW tank, and special DHW parameters.
Pool Service Configuration
Enables pool service, configures exchanger DT, pool temperature limit, and special pool parameters.
Production Priorities Configuration
Sets priorities for service use, allowing simultaneous handling of services with the same priority level.
Activation of Special Programs
Allows manual defrost activation and enables the floor drying program with scheduled outlet temperatures.
Auxiliary Equipment Configuration
Enables and configures internal electric heaters, DHW electric heater, buffer electric heater, external boiler, and chiller.
e-MANAGER Configuration
Configures network meter reading for e-MANAGER and enables external device detection.
Remote-Control Options Configuration
Configures EVU/SG control, service control, and assigns EVU/SG signals to digital inputs.
Protection Configuration Settings
Limits compressor capacity, speed ranges, pump capacity, and defines compressor speed bypass.
Probe Configuration
Configures sensor probes, including type, value, and offset for temperature and pressure readings.
Technical Information Menu
Provides access to technical information screens for various system components.
Manual Activation of Components
Allows manual activation of heat pump components and adjustment of regulation values.
Alarm Log Management
Stores and displays the last 50 alarms, showing details and allowing access to help information.
Default Values Reset
Resets settings to factory defaults, resets energy meters, and configures the compressor inverter.
Change Installer Password
Allows changing the password required to access the INSTALLER menu (PW1).
VOLTA S-SOURCE Source Manager
Main Screen Guide for e-SOURCE
Describes the fields on the main screen of the e-SOURCE source manager.
Active Components in e-SOURCE
Lists the main components activated in the e-SOURCE and shows a consumption bar.
e-SOURCE Operating Modes
Displays icons indicating the current operating mode of the e-SOURCE (Heat absorption, Heat dissipation, Wait).
e-SOURCE Status and Availability
Indicates e-SOURCE availability and status (OFF, ON, EMERGENCY) with reasons.
USER Menu Guide for e-SOURCE
e-SOURCE ON/OFF Menu
Allows turning the e-SOURCE on/off or activating the EMERGENCY status.
e-SOURCE Time Schedule Menu
Adjusts date, time, and daylight savings settings for the e-SOURCE controller.
e-SOURCE Information Menu
Displays operational status of brine pump, outside temperature, source control, and geothermal/aerothermal sources.
e-SOURCE Alarms Menu
Displays active alarms, recurring alarms, and allows resetting alarms for the e-SOURCE.
INSTALLER Menu Guide for e-SOURCE
e-SOURCE Language Selection
Selects the language for the heat pump controller and configures language mask display.
e-SOURCE Model Selection
Selects the e-SOURCE model and configures pLAN network for e-SOURCE COMMUNITY.
Source Configuration Settings
Enables and configures source type (geothermal, aerothermal), limits, and capacity.
Source Management Options
Manages source control (T_RETURN, DT_AIR), selects return temperature control, and sets priorities.
Remote Control Options Configuration
Enables remote control for e-SOURCE, configures digital inputs, and sets up BMS communication.
Probe Configuration for Sensors
Configures sensor probes, including type, value, and offset for temperature and pressure readings.
Technical Information Menu for e-SOURCE
Provides technical information on aerothermal sources, AI values, and DI status.
Manual Component Activation for e-SOURCE
Allows manual activation of e-SOURCE components and adjustment of regulation values.
e-SOURCE Alarm Log
Accesses the alarm history log and provides help information for displayed parameters.
Default Values Reset for e-SOURCE
Resets settings to default values for installation and deletes energy meter history.
Change e-SOURCE Installer Password
Allows changing the password to access the INSTALLER menu (PW1).
VOLTA A Multi-Device Installations
Building the VOLTA A MODBUS Network
Describes how to build a MODBUS network for VOLTA A heat pumps, including wiring and recommendations.
Software Version Compatibility for VOLTA A
Ensures correct operation by verifying software compatibility across all units in the installation.
Configuration and Commissioning of VOLTA A Systems
Steps for configuring and starting communications between indoor and outdoor units in a multi-device setup.
VOLTA W and VOLTA W-H Multi-Device Installations
Types of pLAN Network Installations
Lists types of multi-unit installations requiring a pLAN network connection.
Building a pLAN Network for VOLTA W/W-H
Explains how to connect pLAN terminals and configure access addresses for controllers and pGD1 terminals.
Configuring and Starting Up a pLAN Network
Steps to configure and start up a pLAN network, including software compatibility and address assignment.
Compatible Software for pLAN Installations
Ensures unit compatibility by verifying software versions from the same compilation series.
Configuring pLAN Address for Heat Pump Controller
Guides on configuring the pLAN address for heat pump controllers, assigning roles and enabling slaves.
Configuring pLAN Address for VOLTA S Accessories
Addresses for VOLTA S accessories are pre-configured; no manual configuration needed.
Configuring pLAN Address for pGD1 Terminal
Details how to configure pLAN addresses for pGD1 terminals and their connected controllers.
Starting Up the pLAN Network
Steps to start up the pLAN network and verify device connectivity and addresses.
Configuring Control Applications per Unit
Guides on configuring unit control applications after the pLAN network is established.
Need help?
Do you have a question about the A Series and is the answer not in the manual?
Questions and answers