Related Manuals for GÜDE EPC 8314-1
Summarization of Contents
Device Description
Security Advice
Stickers with safety instructions are attached to the device. Depending on the type of installation, these instructions may be concealed.
Installation and Setup
Explains the physical connectors and the start-up procedure for the device.
Technical Specifications
Lists the technical specifications including interfaces, network, power supply, environment, case, measurements, and weight.
Sensor Information
Describes the two external sensors that can be connected to the device and their specifications.
Operating the Device
Direct Operation
Covers manual port switching using front panel buttons and display information.
Control Panel (Web Interface)
Explains how to access and use the web interface for device control.
Maintenance Procedures
Details maintenance functions available via the web interface, such as firmware updates.
Firmware Updates
Instructions for updating firmware, certificates, and configurations via the web interface.
Bootloader Mode
Describes actions that can be executed using GBL_Conf.exe when the device is in Bootloader mode.
Device Configuration
Network Configuration
Explains how to configure TCP/IP settings using DHCP and Ethernet parameters.
IP ACL
Explains the IP Access Control List for filtering incoming IP packets and managing access.
HTTP Settings
Details HTTP server options, ports, TLS versions, and password protection settings.
Protocol Settings
Introduces network protocols supported by the device, including Console, Telnet, and SSH.
Console and SSH
Configures Telnet and SSH settings, including ports, echo, login, and push messages.
SNMP Configuration
Details SNMP configuration, including GET/SET commands, community settings, and traps.
MQTT Configuration
Configures MQTT client for sending messages and receiving commands, including broker details and TLS.
Timer and Sensor Configuration
Configures device time settings using NTP and enables/configures timers for automating actions.
Timer Configuration
Explains how to create and configure simple and complex timer rules for port switching.
Sensor Setup
Details how to configure connected sensors, including type, name, and data channels.
Port Switching Rules
Configures switching actions triggered by current and sensor values crossing defined limits.
Front Panel Controls
Configures front panel settings such as button lock, port switching, and default display.
Specifications and Interfaces
Automated Access
Describes the different interfaces for accessing device configuration and status, including HTTP and Console.
Console Access
Explains how to use console commands via SSH or Telnet for configuration and control.
Serial Console
Details how to connect and configure a serial console using RS232, including KVM protocol.
HTTP Authentication
Explains session authentication modes and compatibility with previous access methods.
IP ACL and IPv6
Describes IP Access Control List for managing access and explains IPv6 addressing.
Message Types
Details supported message types like E-mail, SNMP Traps, and Syslog.
Modbus TCP
Explains Modbus TCP functionality, address ranges, and supported functions.
SNMP Operations
Describes SNMP usage for status information, commands, MIB tables, and versions.
SSL/TLS Standards
Explains TLS compatibility, security standards, and creating SSL certificates.
Support and Troubleshooting
Data Security Measures
Recommends measures for high data security, including HTTP passwords and secure protocols.
HTTP Performance
Discusses HTTP performance, REST API access, and SSL/TLS connection performance.
TLS 1.3 Performance Issues
Addresses performance issues with TLS 1.3 in certain browsers and suggests solutions.
Contact Information
Provides contact details for GUDE Systems GmbH, including address, phone, fax, and email.
Frequently Asked Questions (FAQ)
Answers frequently asked questions regarding device accessibility, configuration, and software updates.
Need help?
Do you have a question about the EPC 8314-1 and is the answer not in the manual?
Questions and answers