Related Manuals for RINK DS3800 hybrid
Summarization of Contents
EC Declaration of Conformity
Machine Description and Identification
Details on product article, commercial name, model, and function.
Harmonised Standards Reference
Lists harmonised standards applied as per Article 7 2.
Safety Information and Warnings
Types and Classification of Warnings
Explains warning symbols, signal words (Danger, Warning, Caution, Notice).
General Safety Instructions
Essential rules for safe operation and maintenance of the spreader.
Safety Distances
Specifies required distances from rotating parts and ejected foreign bodies.
Intended and Abnormal Use
Defines proper usage and prohibits misuse of the disc spreader.
Information and Safety Signs
Details on safety signs attached to the machine for user awareness.
Symbol Signs
Explanation of symbols used on the disc spreader controls and components.
Disc Spreader Description and Components
Machine Structure Overview
Overall structure of the disc spreader, including main components.
Hopper, Complete
Description of the hopper, its construction and spreader gate mechanism.
Spreader Unit, Complete
Details on the spreader chute, discs, throwing vanes, and hydraulic motors.
Electro-Hydraulic Control Unit
Information on the electro-hydraulic control unit and its pressure settings.
Chassis and Drawbar Types
Details chassis variants (DS1200, DS1600, DS3800) and drawbar options.
Conveyor Unit, Complete
Details of the conveyor belt, hydraulic motor, and protective covers.
PTO Driven External Oil Supply Unit (Option)
Explains the optional PTO driven oil supply unit and its components.
Optional Spreader Attachments
Covers infill plates, hopper extension, vibration motors, and conveyor belts.
Braking Systems (Hydraulic, Overrun, Air)
Details hydraulic, overrun, and air brake systems as optional features.
Lighting Unit (Optional)
Installation and connection of optional lighting units for DS1200-DS3100 and DS3800.
Nameplate Information
Location and purpose of the machine's nameplate.
Technical Data for Models
Specifications for DS1200, DS1600, DS3100, and DS3800 models.
Operation
Pre-Operation Checks
Visual inspection and checks before starting operation.
Hitching and Unhitching Procedures
Step-by-step guide for connecting and disconnecting the spreader.
Operating Device Overview
Introduction to the three available operating device versions (evo, hybrid).
Analog Flow Control Operation (evo)
Instructions for using the Analog Flow Control operating device.
VisionX Display Operation (hybrid)
Guide for operating the VisionX Display unit, including modes and settings.
PotiPro Compact Operation (hybrid)
Instructions for using the PotiPro Compact operating device.
Adjusting Throwing Vanes
Procedure for adjusting throwing vanes for even material distribution.
Spreader Chart and Settings
Guide values for setting parameters based on spread rate and material.
Maintenance and Care
Lubrication Schedule
Points and schedule for lubricating the disc spreader components.
Maintenance Schedule and Tasks
Regular maintenance tasks, intervals, and necessary checks.
Conveyor Belt Maintenance
Procedures for tensioning, removing, installing, and readjusting the conveyor belt.
External Oil Supply Unit Maintenance
Oil and filter change procedures for the optional external oil supply unit.
Hydraulic Pump Unit Maintenance (DS3800)
Oil and filter change procedures for the hydraulic pump unit specific to the DS3800.
Storage, Transport, Faults, and Disposal
Storage Recommendations
Guidelines for storing the disc spreader in a covered and dry place.
Transport Procedures
Requirements for hitching and transporting the disc spreader.
Troubleshooting Faults, Causes, and Remedies
Table of common faults, their possible causes, and recommended remedies.
Disposal Guidelines
Instructions for proper disposal of the disc spreader and its materials.
Need help?
Do you have a question about the DS3800 hybrid and is the answer not in the manual?
Questions and answers