Page 1
• En caso de dudas, para eventuales aclaraciones, póngase en contacto con el distribuidor más próximo ó diríjase directamente a: SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 1/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Page 2
Äusserste Vorsicht Prestar especial Faire trés attention attenzione careful ist geboten atención SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 2/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
• To clean plastic panels or shelves, use a damp cloth (in any case avoid liquids containing solvents). Space s.r.l. may at any time make changes to the models described in this manual for technical or commercial reasons. The trademarks are owned by Space s.r.l.
Before carrying out any maintenance on the system, it is necessary to disconnect the power supply. • If in doubt, do not interpret, contact the Space s.r.l. technical assistance in advance in order to receive information to be able to perform operations in conditions of maximum safety.
To remove the batteries, press from the bottom on the inside of the batterycharger support SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 7/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
During the detection phases of the angles, these are simply switched on intermittently, to indicate the operation of the measuring devices. Only for the models of the ARD32HP and ARD32HPR series, during the adjustment phase they report the values in tolerance.
(see figures above). Each target also has a barcode that describes the characterisation of the 3D object in space. The clamp + target calibration and progressive production number for traceability are also contained in the afore- mentioned code.
5.2.2 Cabinet assembly The assembly of the cabinet of the ARD32HPR, ARD32HP and ARD32SP models, consists of fixing the monitor and positioning the PC and printer in their housing (see chap. 3 on page 5). The assembly of the cabinet of the ARD32L models, instead, is illustrated in the specific instruction, which is sup- plied with the equipment.
(FL), front right (FR), rear left (RL) and rear right (RR) positions. See Figura 4 on page 10 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 14/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Choose the “DATABASE” option and confirm. The screen that appears next is the following: Figure 13 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 20/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Page 23
F5 key Logo displayed Logos hidden Figure 15 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 21/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Upright camber/caster, to set the average value for the chassis height and to set the functions of the "Test Drive" and the display of the diagnosis summary. Figure 17 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 22/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Page 25
Smartcard, see chap. 12 on p. 59) it is possible to enable this op- tion Figure 19 To exit the page, press the F1 key SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 23/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
- Attach and switch on (*) the 2 measuring heads on the edges of the lift (see Figure 1) Mount the clamps with the four targets on the wheels, positioning the upper arm at 12 o'clock SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 25/62...
Page 28
ALWAYS be careful to position the vehicle on the centred lift, it must be as centred as possible, in order to speed up and optimise the search and engagement of targets and subsequent measurements. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 26/62...
NOTE 3: To proceed by selecting the vehicle in "traditional" search mode, press the key (see chap. 10.3° p. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 30/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Enter the control values, and press the F4 key to confirm the entered values. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 34/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Note: also during the later adjustment phase (para. 10.12 on p. 42), if there are images for adjustment aid, an F1 is available, to be able to view them if necessary. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 35/62...
When ready, move the vehicle forward very slowly until the arrow of the vehicle matches the point of arrival. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 36/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Page 39
F1 key and then repeat the operations mentioned above. When the run-out has been performed, the pro- gram automatically proceeds to the next step. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 37/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
3) ..Position the front and rear of the vehicle (only necessary if the vehicle was previously raised and the suspension discharged). Press the key to continue. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 38/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
When alignment is achieved, the "STOP" sign image appears, indicating that the program is acquiring the vehicle data measurements. The program proceeds automatically only after the wheels have been aligned. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 39/62...
If the procedure is not performed but it is decide to perform it anyway at the end of the adjustments, it is possi- ble to select the appropriate option in the menu. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 40/62...
(para. 10.13 on page 43) Note: Only for the models of the ARD32HP and ARD32HPR series, during the adjustment phase, it is possible to as- sociate the angle adjustment to a “Beep” sound (they can be set in the “Sound Configuration” option of the “Applica- tion Configuration”...
(*) It is possible to display alternatively the partial-toes or the total toe, by pressing the Shift + F5 keys simultaneously. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 43/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
10.13). The program prompts steering back to centre before displaying the front adjustment page (Figure 49). Figure 51 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 44/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
At this point, the program displays the adjustment data again (see para. 10.13 on p. 43) press the key to display the summary page (para. 10.14 on p. 46) SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 45/62...
NOTE: It is necessary to activate the “Miscellaneous 2” option in the menu in advance (see para. 9.2 on page 22). SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 47/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
(*) The data contained in the "customer database" can be accessed from the presentation page using the F3 (para. 10.1 on p. 24) Figure 60 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 50/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Page 53
9 - Rear axle data table 10 - Space reserved for notes that can be entered manually SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 51/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Page 54
ARD32HPR – ARD32HP (04/2021) ARD32SP - ARD32L Example of tabular printing Figure 61 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 52/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Page 55
/ green depending on the tolerances tolerance Figure 62 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 53/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Figure 63. IP or name of the PC with Saved tests Figure 63 SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 54/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
9.1 on page 20. Then make the profile visible by pressing F5 again, as indicated below in Figura 66. Press F1 to exit. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 55/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Attention: If a customised group is deleted, it will no longer be possible to recover it, unless in possession of a backup copy of the database. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 56/62...
Deletes the entire selected element Deletes the last character of the selected element SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 57/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
Attention: If a customised vehicle is deleted, it will no longer be possible to recover it, unless in possession of a backup copy of the database. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 58/62...
To install or update a new database, always refer to the manual cod. M0251 downloadable from the databank site highlighted in your SMART CARD. SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 59/62 Tel. +39 - 011 - 934.40.300, Fax +39 - 011 - 933.88.64 e-mail: info@spacetest.com...
• Press the “Esc” key on the keypad to return to the presentation page (cap.10 on p.24). • Proceed with the usual shutdown of the equipment (see para.6.2 on p. 17). SPACE s.r.l. – Via Sangano, 48 - 10090 TRANA (Torino - Italy) P. 60/62...
Before carrying out any work on the system, it is necessary to disconnect the power supply. If in doubt, do not interpret, contact the Space s.r.l. technical assistance in advance in order to receive information to be able to perform operations in conditions of maximum safety.
For further more detailed information on the management of batteries and accumulators at the end of their service life, contact the After-Sales Service of Space s.r.l.
Need help?
Do you have a question about the ARD32L and is the answer not in the manual?
Questions and answers