Related Manuals for IML IML-RESI PD300
Summarization of Contents
Introduction
1.1 Guarantee Conditions
Details the warranty period and conditions for the IML-RESI system, emphasizing proper usage.
1.2 Conditions of Use
Outlines user responsibilities and limitations of liability for instrument use.
1.3 Instructions as to Application
Provides guidance on the intended materials and proper application of the measuring instrument.
1.4 General
Covers the general conception, system structure, and moisture sensitivity of the instrument.
1.5 Application
Explains how to hold the instrument and specific procedures for examining wooden poles.
1.6 Maintenance
Describes the recommended maintenance schedule and procedures for the drilling instrument.
System Components
3.1 Total View
Provides an overview of the entire IML-RESI instrument, highlighting key components.
3.2 Control Unit
Describes the components of the control unit, including display and navigation.
Functional Description
4.1 Installing the Battery
Step-by-step guide on how to properly install the battery into the instrument.
4.2 Removing the Battery
Instructions for safely removing the battery, including precautions for data loss.
4.3 Switching ON / OFF
Details the procedure for powering the instrument on and off using the navigation knob.
4.4 Main Menu
Explains the normal and advanced modes of the main menu and its components.
4.5 Making a Measurement
Guides the user through the process of taking a measurement, including using the 45° adapter.
4.6 Drilling Settings
Describes how to access and configure drilling settings, such as depth preselection.
4.7 Relative Mode Tilt Sensor
Explains the function and activation of the relative mode tilt sensor for angle measurement.
4.8 Changing the Feed Speed
Details how to adjust the feed speed stages of the drilling needle.
4.9 Changing the Rotational Speed of the Drilling Needle
Instructions for adjusting the rotational speed of the drilling needle in advanced mode.
4.10 Changing the ID Number
Guide on how to modify the ID number or project name for measurements.
4.11 Changing the Remark
Instructions for adding or changing a remark associated with a measurement.
4.12 Showing a Profile
Explains how to display and navigate the measurement profile graph.
4.13 Showing a Measurement
Details how to view stored measurement data, including options to navigate or print.
4.14 Delete Measurements
Provides instructions on how to delete the last measurement or all recorded measurements.
4.15 Menu Drilling Needle
Describes the options available within the drilling needle menu, including automatic and manual change.
4.16 Device Information
Explains how to access and view detailed information about the instrument's hardware and software.
4.17 System Control
Covers various system control settings like units, password, and power management.
Need help?
Do you have a question about the IML-RESI PD300 and is the answer not in the manual?
Questions and answers