Related Manuals for rock space ZC1-A
Summarization of Contents
Appearance And Function
Driver
Controls the lateral movement of the blade kit for precise positioning.
Blade Kit
Component responsible for cutting protective film, detailed on later pages.
Platen Roller
Function is to fix the protective film securely onto the machine bed.
Lateral Panel
Sets the limit for position and movement of the protective film.
Operation Display
Touch-sensitive interface for controlling device operations.
Power Switch
Button used to start or stop the device.
Power Interface
Port for connecting the device to a power source.
Pressing Bar
Mechanism to control the platen roller, allowing it to lift or fall.
Blade Kit Clamp
Secures the knife handle, ensuring the blade kit is locked.
Instructions
Install Blade Kit
Step-by-step guide for installing the blade kit onto the plotter.
Power On
Instructions on connecting the power cord and starting the device.
Cut Film
Prepare Protective Film
Ensuring the film is flat, complete, and without defects before cutting.
Place Film on Machine
Positioning the protective film correctly on the plotter using the pressing bar.
Activate Film Code
Enter Identification Code
Inputting the consumable identification code found on the film package.
Cautions
Safety Precautions
Warnings regarding blade contact, liquids, power cord handling, and device placement.
How to Install the Film
Step-by-step Installation Guide
Detailed instructions for applying a protective film to a device screen.
Precautions
Operational Safety Measures
Guidelines on urgent stops, avoiding blade impact, and proper shutdown procedures.
Need help?
Do you have a question about the ZC1-A and is the answer not in the manual?
Questions and answers