3M Dynatel 2273E Operator's Manual
3M Dynatel 2273E Operator's Manual

3M Dynatel 2273E Operator's Manual

Advanced cable and fault locator

Advertisement

Quick Links

Dynatel
2250E/2273E
Advanced Cable and
Fault Locator
Operators Manual
September 1999
78-8097-6500-7-B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dynatel 2273E and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction
Installing or Replacing Batteries
Procedure for installing or replacing batteries in the device.
Initial Receiver Configuration
Receiver Battery Test Procedure
How to perform and interpret the receiver's battery test.
Transmitter Battery Test and Power Options
Transmitter Battery Test
Procedure to test transmitter battery condition.
External DC Power and 5 Watt Output
Operating the transmitter using external DC power and selecting 5W output.
Locating a Buried Cable
Transmitter Setup Methods
Details various methods (Direct Connect, Dyna-Coupler, Induction) for transmitter setup.
Receiver Setup and Trace Modes
Configuration of the receiver and explanation of trace modes.
Determining Cable Depth and Current
Using Current Indications for Cable Tracing
How to use current readings for cable identification and troubleshooting.
Locating Sheath Faults (2273E ONLY)
Transmitter Setup for Sheath Faults
Steps to set up the transmitter for locating sheath faults.
Receiver Setup for Sheath Faults
Steps to set up the receiver for locating sheath faults.
Locating an Active Duct Probe (ADP)
Determining ADP Depth
How to determine the depth of an Active Duct Probe.
Locating EMS Markers
Detecting Markers during Cable Tracing
Detecting markers while tracing a cable path.
Pinpointing Markers with Receiver
Pinpointing marker positions using the receiver.
Toning Aerial Faults
Transmitter Setup for Aerial Fault Toning
Transmitter setup procedures for toning aerial faults.
Receiver Setup for Aerial Fault Toning
Receiver setup procedures for toning aerial faults.
Cable or Pair Identification
Transmitter Setup for Identification
Transmitter setup for cable or pair identification.
Receiver Setup for Identification
Receiver setup for cable or pair identification.
Optional Accessories
List of Optional Accessories
A list of available optional accessories for the device.
Technical Information
Transmitter Specifications
Technical specifications for the transmitter unit.
Receiver Specifications
Technical specifications for the receiver unit.

Table of Contents