Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in...
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied,...
Get started The Nokia Audio Controller AD-44 can be used with a compatible Nokia mobile device that has the Nokia 2.5-mm AV connector and a compatible Nokia headset that has a 3.5-mm plug. Insert the plug of your headset into the headset connector (part 1 shown on the title page), and insert the plug of the controller (11) into the AV connector on your mobile device.
Call handling To make a call, use your mobile device in the normal way when the controller is connected to your mobile device. During the call, speak into the microphone (2) of the controller. If your mobile device supports voice dialing, press and hold the answer/ end key (4), and proceed as described in the user guide of your mobile device.
Mute the microphone To mute or unmute the microphone of the controller during a call, press the mute key (9). Listen to music You can use the controller and headset to listen to music on your compatible mobile device. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.
To pause or restart the music player, press the play/pause key. Listen to the radio To listen to the FM radio, start the radio feature of your compatible mobile device. See the user guide of your mobile device for details. To search for a previously saved radio channel, press the fast forward or rewind key repeatedly.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
• Do not attempt to open the device. • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. •...