Related Manuals for Metallkraft HSBM 610 HS
Summarization of Contents
Introduction
Copyright
Explains copyright ownership and usage restrictions for the manual's content.
Customer service
Provides contact information for dealers and manufacturer for technical support.
Limitation of Liability
Outlines conditions under which the manufacturer is not liable for damages.
Safety
Symbol Explanation
Explains the meaning of warning symbols (DANGER, WARNING) used in the manual.
Safety Symbols and Notes
Explains warning symbols like CAUTION, ATTENTION, and NOTE for potential hazards.
Tips and recommendations
Provides useful tips for efficient and trouble-free operation.
Qualification of personnel
Details the required qualifications for operators and specialist staff.
Personal protective equipment
Describes essential personal protective equipment (gloves, boots, clothes).
General Safety Instructions
Lists key safety practices like using guards, keeping clean, and avoiding misuse.
Safety signs on the machine
Emphasizes the importance of observing and maintaining safety markings on the machine.
Intended Use
Defines the exclusive purpose of the machine and warns against misuse.
Technical Data
Table
Presents a table with technical specifications for HSBM 305 HS and HSBM 610 HS.
Type plate
Explains information found on the machine's type plate, including model and serial number.
Transport, packaging and storage
Delivery and Transport
Provides guidelines for checking delivery for damage and safe transport methods.
Transport
Details safe practices for transporting the machine using pallet trucks or forklifts.
Packaging
Explains how to handle and dispose of packaging materials.
Storage
Provides instructions for storing the machine in a safe and dry environment.
Description of the device
Device Components
Identifies and labels the main components of the brake bending machine.
Installation and commissioning
Set up
Guides the user through the initial setup and mounting of the machine.
Tension the sheet metal
Explains the process of clamping the sheet metal for bending.
Bending process
Details the step-by-step procedure for bending the sheet metal.
Adjusting the upper beam
Describes how to adjust the upper beam for proper material thickness.
Change bending segments
Explains how to assemble or disassemble the segmented upper jaw.
Care and Maintenance/Repair
Tips and recommendations
Offers advice for maintaining the machine in good operating condition.
Care by cleaning
Provides instructions for cleaning the machine safely.
Maintenance
Outlines regular maintenance tasks for the machine.
Troubleshooting
Lists common faults, their causes, and recommended remedies.
Disposal, recycling of old equipment
Decommission
Details the process for decommissioning and preparing the machine for disposal.
Disposal of electrical equipment
Explains how to dispose of electrical components responsibly.
Disposal of lubricants
Provides guidance on the proper disposal of lubricants.
Spare parts
Ordering spare parts
Specifies the information required when ordering spare parts.
Spare parts drawing
Presents a diagram to help identify specific spare parts by number and position.
Need help?
Do you have a question about the HSBM 610 HS and is the answer not in the manual?
Questions and answers