Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BEFCO GREEN-RITE GRT-258
Summarization of Contents
SAFETY
Signal Words
Explains the meaning and use of signal words like DANGER, WARNING, and CAUTION.
1 - GENERAL INFORMATION
1.01 - General
Provides general operational advice, including metric tool usage and side determination.
1.02 - Model and Serial Number ID
Instructs on recording model and serial number for dealer service.
2 - SAFETY PRECAUTIONS
2.01 - Preparation
Lists essential safety checks and personal protective equipment before operating the implement.
2.02 - Starting and Stopping
Details safe procedures for starting and stopping the tractor and implement.
2.03 - Messages and Signs
Emphasizes adherence to safety decals and instructions on the machine.
3 - OPERATION
3.01 - Operational Safety
Stresses the importance of operator responsibility, training, and careful use of the equipment.
3.02 - Set Up
Covers initial machine setup, lubrication, and checking hardware before use.
3.03 - Rear Tailgate Adjustment
Explains the function and adjustment of the rear tailgate for soil pulverization and safety.
3.04 - Tickler Tine Adjustment
Details how to adjust the tickler tines for optimal grass seed coverage and soil incorporation.
3.05 - Corrugated Roller Adjustment
Describes how to adjust the corrugated roller for controlling working depth and compacting soil.
3.06 - Front Roller Adjustment
Explains how to adjust the optional front roller for following ground contours and controlling depth.
3.07 - Front Wheels Adjustment
Details adjusting front gauge wheels for following ground contours and controlling depth.
3.08 - Hopper Adjustment
Covers adjusting the seed hopper capacity and calibration handle settings.
3.09 - Seed (or Fertilizer) Hopper Calibration
Provides instructions and tables for calibrating the seed hopper for different seed types.
3.10 - Driveline
Discusses driveline safety, length adjustment, and proper connection procedures.
3.11 - Safety Slip Clutch
Explains the function and adjustment of the safety slip clutch to prevent driveline damage.
3.12 - Pre-Operational Check
Lists essential checks to perform before operating the machine.
3.13 - Attaching to the Tractor
Guides on safely attaching the Green-Rite to a tractor.
3.14 - Start Up
Details the safe procedure for starting the tractor and engaging the PTO.
3.15 - Test Run
Outlines steps for performing a test run and checking for proper operation.
3.16 - Working Depth
Explains how to set and adjust the working depth for different rotors and soil conditions.
3.17 - Working Speed
Advises on determining the correct working speed based on soil, depth, and tractor power.
3.18 - Headland Procedure
Describes the correct procedure for turning at headlands.
3.19 - Working Limitations
Discusses limitations when using the tilling rotor in tough soil conditions.
3.20 - Uneven Terrain
Provides precautions for operating the machine on uneven ground to prevent rollovers.
3.21 - Transporting
Covers safety guidelines and procedures for transporting the machine.
4 - MAINTENANCE
4.01 - Maintenance Safety
Highlights safety precautions to be followed during all maintenance activities.
4.02 - Service
Details lubrication points and procedures for various machine components.
4.03 - Changing Rotors
Explains how to change between the aerating and tilling rotors.
4.04 - Blade Maintenance
Provides instructions on checking, changing, and torquing blades for optimal performance.
5 - REPAIR PROCEDURES
5.01 - Gearbox
Details the steps for removing and reassembling the gearbox.
5.02 - Chain Case
Outlines the procedure for removing and replacing the chain in the chain case.
5.03 - Removing the Rotor
Explains how to unbolt and remove the rotor from the machine.
5.04 - Suggested Spare Parts
Lists recommended spare parts to keep on hand for preventing work delays.
5.05 - Storage
Provides instructions for proper storage of the machine after the season.
8 - WARRANTY
1. LIMITED WARRANTY
Defines the terms and conditions of the limited warranty provided by BEFCO.
2. DISCLAIMER OF ALL OTHER WARRANTIES AND REMEDIES
States the limitations and disclaimers regarding warranties beyond the explicitly stated ones.
3. CUSTOM WORK
Specifies warranty limitations for commercial custom work operations.
4. RENTAL
Outlines warranty limitations for machines used for rental purposes.
5. REGISTRATION
Details the process for registering the machine to qualify for warranty coverage.
6. WARRANTY SERVICE
Explains how warranty service must be performed by authorized dealers.
7. UNAPPROVED SERVICE OR MODIFICATION
Lists conditions under which the limited warranty will be terminated.
8. ACCIDENTS AND NORMAL MAINTENANCE
Clarifies what is not covered by the warranty, such as wear and damage from accidents.
9. REPLACEMENT PARTS
States the warranty period for replacement parts.
Need help?
Do you have a question about the GREEN-RITE GRT-258 and is the answer not in the manual?
Questions and answers