Table of Contents
Advertisement
OPERATOR'S MANUAL
X-SERIES EARTH AUGER
X950, X1450, X1950, X2450, X1455 X1955
X1200, X1600, X2200, X3450, & X4450
X975, X1475, X1975, X2475, X3575
SERIAL NUMBER: ___________________
Manual Number: 22681
MODEL NUMBER: ___________________
Revision: 17
800-456-7100 I www.paladinattachments.com
503 Gay Street, Delhi, IA 52223, United States of America Copyright ©
M-119
4-4-16-18
Advertisement
Table of Contents
Related Manuals for paladin McMillen X1475
Summarization of Contents
Preface
Before Operation
Essential safety and operational readiness checks before using the equipment.
Safety Alert Symbol
Explanation of the industry-standard symbol used to warn of potential hazards.
Service
Guidelines for using manufacturer-approved replacement parts and recording unit information.
Sound and Vibration
Information on factors influencing sound and vibration levels and their measurement.
General Safety Precautions
Know Your Equipment
Importance of understanding equipment capabilities, dimensions, and performing pre-operation inspections.
Do Not Modify Machine or Attachments
Warning against modifications that could compromise safety, function, or lifespan of the attachment.
Safely Maintain and Repair Equipment
Safety practices for maintenance and repair, including attire, environment, and tool usage.
Safely Operate Equipment
Rules for safe operation, including operator training, site awareness, and equipment condition.
Equipment Safety Precautions
Operating the Auger
Safety guidelines for operating the auger, including bystander proximity and terrain conditions.
Transporting the Auger
Procedures and precautions for safely transporting the auger on the prime mover.
Maintaining the Auger
Safety measures and procedures to follow before performing maintenance on the auger.
Decals
Replacing Safety Decals
Instructions for cleaning, applying, and replacing safety decals on the equipment.
Installation Instructions
Quick Attach Mounting Assemblies
Step-by-step guide for mounting the auger using quick attach systems.
Backhoe and Excavator “Pendulum" Mounting Assemblies
Instructions for attaching the auger to backhoe/excavator dipper arms using pendulum mounts.
Backhoe and Excavator "Pin Grabber" Mounting Assemblies
Procedure for mounting the auger using pin grabber systems on backhoes/excavators.
Universal Front End Loader Mounting Assembly
Steps for adapting the auger to front-end loaders using a universal mounting assembly.
Weld-on Excavator Mounting
Instructions for welding the auger mounting plate onto excavator brackets.
Operating Instructions
Intended Use
Defines the primary purpose of the auger unit for drilling vertical earth holes.
Operation
Detailed steps for operating the auger, including speed, depth, and cleaning procedures.
Storage
Procedures for proper storage of the auger, including lubrication and protection.
Removal from Storage
Steps to take when removing the auger from storage for use.
Lift Points
Identification and safe practices for lifting the auger attachment.
Tie Down Points
Guidelines for securing the auger to a trailer for safe transportation.
Transporting
Recommendations and regulations for safely transporting the auger attachment.
Maintenance
Lubrication
Schedule and procedures for changing planetary gear reduction oil and checking other components.
Specifications
Model 950
Technical specifications for the Model 950 auger, including diameter, flow, pressure, and torque.
Model 1450
Technical specifications for the Model 1450 auger, including diameter, flow, pressure, and torque.
Model 1950
Technical specifications for the Model 1950 auger, including diameter, flow, pressure, and torque.
Model 2450
Technical specifications for the Model 2450 auger, including diameter, flow, pressure, and torque.
Need help?
Do you have a question about the McMillen X1475 and is the answer not in the manual?
Questions and answers