OWNERS MANUAL 2. INSTALLATION GUIDES CLEARANCES The below diagrams illustrate the minimum clearances required for installation of the Countryman and Clydesdale (pedestal base and wood stacker), next to combustible walls and on combustible flooring. Combustible Walls When wall materials are combustible, such as timber, a half-round Safety Flue Guard with a minimum height of 1000mm is required.
JARRAHDALE WOOD HEATERS COUNTRYMAN & CLYDESDALE OWNERS MANUAL FLUE INSTALLATION Position wood heater in the desired position. We recommend a central position, away from window, doors, and furniture. Note: Heat shields may be required to protect combustible. Using a plumb bob and line, mark the centre of the flue spigot on the ceiling. Drill a small hole in the ceiling and check the roof space for obstructions.
JARRAHDALE WOOD HEATERS COUNTRYMAN & CLYDESDALE OWNERS MANUAL BAFFLE PLATE INSTALLATION The following video details instructions on how to install a ba le plate to a Jarrahdale Wood Heater. For written instructions, please see page 12 of this manual. Video Link: https://youtu.be/PZXL95Ioz7Q?si=yNB4tRr_zmv9JvPF HANDLE ASSEMBLY The following diagram indicates the correct position for each component of your wood heater door handle.
Ensure your hearth is the correct size. For heater installation on to combustible flooring, the hearth should o er a minimum clearance of 650mm (for Countryman) and 750mm (for Clydesdale) at the front and 200mm either side of the heater door.
Where a wood heater has not been properly cured, surface issues such as paint lifting and or bubbling will not be covered by warranty. Jarrahdale Heating & Cooling take no responsibility for surface damage resulting from failure to correctly cure the paint.
Always keep the door closed during normal heater operation. OPTIMISING EFFICIENCY Jarrahdale Wood Heaters are designed to be operated as a slow combustion heater. This means the combustion rate is slower to allow the fire to burn gradually for many hours.
Suppliers List. This list features suppliers in the Perth area that we have come to know as reputable through customer endorsements and our own experiences. As suppliers and availability can fluctuate, please contact Jarrahdale Heating and Cooling for the latest copy. Please Note: The suppliers list is provided for your convenience.
6. REPAIRS & PART REPLACEMENTS After many years of roaring fires, your Jarrahdale wood heater may require servicing or replacement parts to keep it in great condition. Commonly, this includes standard maintenance such as replacing the seals and a chimney sweep.
Measure the Rope: Replacement rope for the door seal can be purchased in a standard length from Jarrahdale Heating and Cooling. Due to the varied sizes of heater doors, the replacement rope may be longer than needed. To measure the rope to size, loosely place the rope around the channel on the inside of the door frame to confirm the required length.
AVAILABLE SPARE PARTS LIST A large range of replacement parts are available from Jarrahdale Heating and Cooling to help keep your wood heater looking like new for many years to come. Parts can be ordered directly or through your local authorised dealership.
• 3 Year Ba le Warranty • 12-month Air Tube Warranty Tampering or incorrect use of your Jarrahdale wood heater will void any warranties associated with your wood heater. Proof of purchase must be shown prior to warranty approval. Warranty Claims For all warranty claims, please contact the Jarrahdale Heating and Cooling service department: 08 9493 6512.
JARRAHDALE WOOD HEATERS COUNTRYMAN & CLYDESDALE OWNERS MANUAL 7. IMPORTANT WARNINGS WARNING. ANY MODIFICATION(S) OF THE COMPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING BY THE TESTING AUTHORITY IS CONSIDERED AS BREACHING AS/NZS 4013. WARNING. DO NOT USE FLAMMABLE LIQUIDS OR AREOSOLS TO START OR REKINDLING THE FIRE.
Need help?
Do you have a question about the Clydesdale and is the answer not in the manual?
Questions and answers