Related Manuals for Lincoln LSC30
Summarization of Contents
STATEMENT
Appliance Use and Supervision
Guidelines for safe appliance use by children and persons with reduced capabilities.
Installation and Electrical Safety
Requirements for permanent connection, qualified electricians, RCDs, and disconnection.
Component Placement and Cord Safety
Rules for live parts accessibility and damaged supply cord replacement.
INSTALLATION
Module Positioning and Mounting
Instructions for placing the power module and mounting the bracket securely.
Environmental Protection
Advice on protecting the unit from direct sunlight and rain.
Electrical Connections
Steps for connecting mains plugs and cell cable to the power pack.
PLUMBING
Professional Plumbing and DIY Advice
Recommendations for plumbing installation by qualified professionals or careful handymen.
Priming Fluid Warning
Crucial warning against applying priming fluid to the clear cell housing.
Pipework and Glue Application
Guidance on pipework, priming fluid use, and glue application for PVC connections.
Water Sense Probe Installation
Details on filter to cell piping and water sense probe placement for accurate readings.
CONTROLS
Button Functions Overview
Explains the purpose of MENU, ENTER, MODE, and Salt/Mineral ppm buttons.
ON/OFF and Navigation Buttons
Describes the ON/OFF toggle and the up/down arrow functions for navigation.
MENU AND SUB-MENUS
Time and Output Settings
Adjusting the clock time and chlorine output levels.
Operational Timer and Protection
Configuring timer settings and pump protection features.
Cell Maintenance and Display Settings
Managing cell cleaning cycles and adjusting display brightness/contrast.
System Information
Accessing details on total hours, cell hours, polarity, and unit size.
MODE
ON Mode Operation
Sets the chlorinator and pump to operate continuously (24/7).
TIMER Mode Operation
Operates the chlorinator and pump only during specified timer settings.
SUPERCHLORINATE Mode
Sets operation to 100% output for 24 hours before reverting to TIMER mode.
SPA Mode Operation
Operates at 10% output and runs the pump 24/7 until manually changed.
BACKWASH Mode Explanation
Indicates that Backwash is explained on a subsequent page.
BACKWASH
Backwash Function Overview
Simplifies pump operation during filter lever adjustments for backwashing.
Filter Lever Operation Warning
Critical warning not to operate the filter lever while the pump is running.
Automatic Pump Start/Stop
Notifies that the pump will automatically start and stop during the process.
Backwash Procedure Steps
Detailed steps for setting the valve to backwash and starting the pump.
Rinse Cycle Procedure Steps
Instructions for setting the valve to rinse and completing the cycle.
SALT
Recommended Salt Concentration
Specifies ideal salt levels for sodium and mineral/magnesium chloride salts.
Salt Measurement Procedure
Details on initiating salt measurement and the requirement for water flow.
Water Temperature Stabilization
Advises stabilizing water temperature for at least 5 minutes before measurement.
Salt Level Measurement Limitations
Informs about the measurable range and accuracy of salt level readings.
Salt Measurement Accuracy Note
Highlights that salt measurement is a guide and professional checks are recommended.
WATER QUALITY
pH Levels and Adjustment
Maintaining optimal pH (7.2-7.8) for chlorine effectiveness and adjustment methods.
Stabiliser Levels and Measurement
Recommended stabiliser levels (20-50 ppm) and measurement frequency.
Chlorine Levels and Measurement
Target chlorine levels (2-3 ppm) for good disinfection and adjustment methods.
Total Alkalinity Levels
Recommended range for total alkalinity (80-150ppm) measured monthly.
Calcium Hardness Levels
Recommended range for calcium hardness (150-250ppm) measured yearly.
TROUBLESHOOTING
Priming Cell Issues
Ensuring the cell is primed with water for proper circuit completion.
Chlorine Output Not Reaching 100%
Addresses low salt, low water temperature, and calcium buildup on cell plates.
Cell Life and Longevity
Information on expected cell lifespan based on reversal cycles.
No Chlorine Measured in Water
Troubleshooting high pH, lack of stabiliser, or insufficient operating time/output.
TROUBLESHOOTING (Continued)
Calcium Build on Cell
Adjusting cell cleaning time or cleaning the cell due to excess calcium.
Salt Measurement Accuracy
Addressing salt measurement inaccuracies due to cell condition or calibration.
Salt Measurement Cell End of Life
Guidance on when to replace the cell and reliance on external measurements.
Pump Always ON
Checking pump connection and chlorinator mode settings (TIMER vs ON/SPA).
Display Temperature Issues
Resolving display issues by cleaning cell plug/cable contacts.
High Salt Levels
Reducing high salt levels by backwashing and refilling the pool.
TROUBLESHOOTING (Continued)
Chlorinator Output Limited to 80%
Explanation of output limitation due to high salt levels and remedy.
Water/Condensation on Screen
Normal process for moisture expulsion from the screen.
SPECIFICATION TABLE
Model Specifications
Detailed technical specifications for various Lincoln Chlorinator models.
Pump Outlet Rating
Maximum pump outlet rating applicable to all model sizes.
PARTS
Exploded View of Components
Visual diagram identifying key components of the chlorinator unit.
Part Number List
A list correlating part numbers with their descriptions.
WARRANTY
Warranty Coverage and Exclusions
Defines what is covered and excluded under the manufacturer's warranty.
Warranty Claims Process
Instructions on how to return equipment for warranty repair or replacement.
Warranty Period
Specifies warranty duration for domestic and commercial power packs and cell electrodes.
Need help?
Do you have a question about the LSC30 and is the answer not in the manual?
Questions and answers