Table of Contents
Advertisement
Advanced Flexible Component Placer
CP Series
CP45F/FV NEO
CP45FS/FSV NEO
CP45F/FV-L NEO
CP45FS/FSV-L NEO
Maintenance Reference
For safety, be sure to read the manual before using
this machine and follow the instruction in this manual.
Warning
People who have not received training on this
machine should not handle it
.
Advertisement
Table of Contents
Related Manuals for Samsung CP45FV NEO
Summarization of Contents
Preface
About Safety
Key safety guidelines for operating the machine safely, including basic points and hazard symbols.
Safety Precaution Labels
Explains safety labels attached to the machine's front and rear views.
Preventive Maintenance
Maintenance Procedure
Step-by-step guide for performing maintenance tasks, including pre- and post-task procedures.
Environmental Conditions
Specifies required air pressure, air consumption, and power voltage requirements.
Daily Inspection
Nozzle Inspection and Cleaning
Procedures for checking nozzle wear, contamination, and cleaning methods.
Stage Camera Cleaning
Steps for cleaning the camera lens and cover glass for clear imaging.
Pneumatic Pressure Setup
Instructions for checking and adjusting the machine's pneumatic pressure.
Weekly Inspection
Nozzle Holder Inspection
Checking for bending in the nozzle holder to prevent placement errors.
Conveyor System Inspection
Inspecting PCB conveyor belts for tension, wear, and alignment issues.
Lubricant Method
Component Lubrication Guide
Table detailing lubrication types, methods, and periods for machine components.
Inspection of the Controller
Power Inspection
Steps to check the status and function of power supply switches and breakers.
Motor Troubleshooting
Troubleshooting guide for common motor drive errors and their countermeasures.
Need help?
Do you have a question about the CP45FV NEO and is the answer not in the manual?
Questions and answers