Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Morra MF 2260
Summarization of Contents
SECTION 1: General information
1.1 INFORMATION ABOUT THE MANUAL
Manual provides essential information for correct machine use and service.
1.2 INFORMATION ABOUT THE MACHINE
Covers machine design, intended use, liability, identification, and precautions for safe operation.
1.3 TECHNICAL SPECIFICATIONS
Details machine models, power, weight, dimensions, and tractor requirements.
1.3. bis ROTARY MOWER DMD
Describes the rotary mower variant with a hydraulic cylinder for cutting bar lifting.
1.4 NOISE LEVEL
Highlights the need for protective equipment due to machine noise levels.
1.5 PACKING AND TRANSPORT FOR DELIVERY
Explains machines are shipped partially demounted to reduce transport costs.
1.6 STORAGE
Provides procedures for proper machine storage to prevent damage and rust.
1.7 DEMOLITION AND SCRAPPING
Outlines guidelines for disposing of the machine in an authorized dump according to local laws.
SECTION 2: Safety notes
2.1 SAFETY REGULATIONS AND ACCIDENT PREVENTION
Essential safety prescriptions and general accident prevention guidelines for machine operation.
2.2 SYMBOLS USED
Explains manual symbols indicating potential dangers and vital safety instructions.
2.3 POSITION OF SAFETY DECALCS ON MACHINE
Illustrates the location of safety decals on the machine for operator awareness and adherence.
SECTION 3: Installation and operation
3.1 SAFETY REGULATIONS WHEN HITCHING TO THE TRACTOR
Crucial safety measures and precautions for attaching the machine to the tractor.
3.2 COUPLING TO THE TRACTOR'S 3-POINT HITCH
Procedures for connecting the machine to the tractor's three-point hitch system.
3.3 TRANSPORT ON THE ROADS
Guidelines and regulations for safe transportation of the machine on public roads.
3.3.1 TRANSPORT POSITION
Step-by-step instructions to adapt the machine for safe road transport.
3.3.1 bis TRANSPORT POSITION
Specific procedure for adapting the machine with a harpoon system to transport position.
3.4 HOW TO CHECK THE LIFTING CAPACITY AND STABILITY OF THE TRACTOR
Method for checking tractor lifting capacity and stability using a formula and ballast.
3.5 ADJUSTMENT
Details on adjusting work height, cutting height, and other settings for optimal performance.
SECTION 4: Operation
4.1 WORK POSITION
Procedure to switch the machine from transport position to work position.
4.1 bis WORK POSITON
Alternative procedure to switch the machine to work position from transport.
4.2 DURING WORK
Operational guidelines and precautions to follow while the machine is in use.
4.3 DIFFICULT WORK CONDITIONS
Recommendations for operating the machine in challenging terrain or conditions.
4.4 SAFETY RELEASE
Explanation of the safety release mechanism and its function upon impact.
SECTION 5: Maintenance
5.1 BELT CONDITIONS
Procedures for checking and maintaining belt tension and condition.
5.2 DISCS AND KNIVES
Guidelines for checking, maintaining, and replacing discs and knives.
5.3 HOW TO TOP UP THE LUBRICATING OIL
Instructions for checking and refilling oil levels in the overdrive and mowing bar units.
5.4 HOW TO GREASE THE MECHANICAL COMPONENTS
Guidance on greasing various mechanical parts and the driveline regularly.
5.5 STORAGE
Procedures for cleaning and storing the mower for extended periods.
5.6 CHECK-CONTROL TROUBLESHOOTING
Common problems and recommended actions for troubleshooting mower issues.
SECTION 6: Warranty
6.1 WARRANTY PERIOD
Details on the duration of the manufacturer's warranty.
6.2 WARRANTY CONDITIONS
Terms and conditions that define the scope and limitations of the warranty.
SECTION 7: Spare parts
Spare parts
Information on ordering spare parts, emphasizing the use of genuine parts.
Need help?
Do you have a question about the MF 2260 and is the answer not in the manual?
Questions and answers