Table of Contents
Advertisement
3.04.7 – Hyper Transport Configuration Sub-Menu
You can use this screen to view the Hyper Transport Configuration Menu. Use the
Plus and Minus (+/-) keys to change the value of the selected option. The settings are
described on the following pages.
Main
Advanced
Hyper Transport Configuration
CPU1: CPU2 HT Link Speed
CPU1: CPU2 HT Link Width
CPU1: PCI-X0 HT Link Speed
CPU1: PCI-X0 HT Link Width
Feature
Hyper Transport Configuration
CPU1: CPU2 HT Link Speed
CPU1: CPU2 HT Link Width
CPU1: PCI-X0 HT Link Speed
CPU1: PCI-X0 HT Link Width
BIOS Setup Utility
PCI/PnP
Boot
Option
Auto
200MHz
400MHz
600MHz
800MHz
1GHz
Auto
2 Bit
4 Bit
8 Bit
16 Bit
Auto
200MHz
400MHz
600MHz
800MHz
Auto
2 Bit
4 Bit
8 Bit
16 Bit
http://www.TYAN.com
Security
Chipset
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
[Auto]
[Auto]
Use [+] or [-] to
configure system time.
[Auto]
[Auto]
← → Select Screen
↑↓ Select Item
+/-
F1
F10 Save and Exit
ESC Exit
Description
Specify CPU1 to CPU2 Hyper
Transport Link Clock frequency.
If CPU2 is absent, the selection
item will be hide.
Specify CPU1 to CPU2 Hyper
Transport Link Data width.
If CPU2 is absent, the selection
item will be hide.
Specify CPU1 to PCI X Hyper
Transport Link Clock frequency.
Specify CPU1 to PCI X Hyper
Transport Link Data width.
49
Power
Exit
Change Option
General Help
Advertisement
Table of Contents
