Advertisement
Quick Links
Advertisement
Related Manuals for Hills 24HH720
Summary of Contents for Hills 24HH720
- Page 1 Hills Antenna Home Hub Models: 24HH520 24HH720 24HH1000...
- Page 2 Congratulations and thank you for choosing one of our awesome Hills Antenna Home Hubs. We are sure you will find it convenient and easy to use. Before you use your Hills Antenna Home Hub, we recommend that you read through the relevant sections of this manual, which provides a description of your Hills Antenna Home Hub, it’s installation, function and use.
- Page 3 Work by unqualified users may cause electric shock, fire, injury or death. • Do NOT work on the Hills Antenna Home Hub, it’s contents, or wiring in the event of an electrical storm or lightning. • Do NOT clean the contents of the Hills Antenna Home Hub with any liquid or wet cloth.
- Page 4 The period within which the defect must appear if you are to be entitled to claim under this warranty is 12 months. Warranty cover: 1. Any parts in the Hills Antenna Home Hub found to be defective due to faulty materials or workmanship will be replaced at no cost to the owner during the warranty period.
- Page 5 DVD/PayTV from another room, your modulator needs to be turned on. In rare circumstances the power to the Hills Antenna Home Hub may be switched off. For example, a circuit breaker may have tripped or someone turned it off and forgot to turn it back on. This will also turn off some modules located in the Hills Antenna Home Hub.
- Page 6 Escutcheon is included to give you the flexibility of choice. With everything you need in the box to get you started the Hills Antenna Home Hub is the most flexible product on the market and a notch above the rest when it comes to features, quality and serviceability.
- Page 7 Hills Antenna Home Hub The enclosure that gives you so much more. NBN Fibre, Data, AV, Security and Television applications • Flexibility in mounting options Enclosure can be surface or flush mounted, door can be left or right hand opening •...
- Page 8 Hills Antenna Home Hub Enclosure Remove top foam packaging from both sides of the cardboard box. Remove the enclosure from the cardboard box and place face up on a flat surface. Remove the escutcheon by carefully sliding it upwards away from the enclosure body.
- Page 9 Hills Antenna Home Hub Enclosure Surface Mounting Instructions With the cutout template provided mark the wall where the enclosure is to go. Mark the rear fixing points on the back of the enclosure. Where possible locate a wall stud for a good fixing point for the enclosure.
- Page 10 Hills Antenna Home Hub Enclosure Flush Mounting Instructions For internal gyprock walls, locate the wall studs and noggins. The enclosure width is designed to fit between two wall studs. Align the cutout template provided to one side of a wall stud and mark the circumference.
- Page 11 Hills Antenna Home Hub Enclosure Cabling Located at the top of the enclosure are 3 rectangular holes. Cables can be directed through these to access the main gear tray area of the enclosure. Electrical power cable can be directed through the right-hand hole for connection into the double GPO.
- Page 12 Part Number 24HHOF 1 x Open Frame: Included with the Hills Antenna Home Hub are 3 frames, these frames are designed to fit onto the Gear Tray. They can be adapted to mount many different modules and customers equipment. Each frame has four screw points that match up to pre-drilled screw holes on the Gear Tray. Align the appropriate frame to the Gear Tray opposing holes and screw into place, this creates a firm mounting surface for the equipment to be fixed to.
- Page 13 Work area mobility Enhance gaming Study Bedroom Local Area Network (LAN) S2119v2 8 Port CAT6 Data Module 03JCAT6-BL CAT6 UTP LAN Cable With the Hills Antenna Home Hub and these associated parts, you can create your own Local Area Network. Page 13...
- Page 14 Hills Antenna Home Hub Modules 8 Port CAT6 Data Module Part Number S2119v2 The 8 Port CAT6 Data Module is designed for internal house cabling to provide internet access to different rooms. The IDC punch down connection strips offer a convenient connection while maintaining the correct twist rate on the building cabling.
- Page 15 Hills Antenna Home Hub Modules 8 Port CAT6 Data Module Part Number S2119v2 Install the 24HHOF Open Frame in a position on the Gear Tray that best suits your cabling and equipment. Ensure the Module is located correctly in the frame and insert the plastic rivets and lock in place.
- Page 16 Hills Antenna Home Hub Modules 8 Port CAT6 Data Module Part Number S2119v2 In our installation example we have an NBN.Co HFC Connection Box. The NBN.Co Coaxial Connection is located in the outlet top left corner. The NBN.Co HFC Connection Box has been mounted...
- Page 17 Hills Antenna Home Hub Modules Active TV Splitter Module Part Number S2707 (Optional Accessory, purchase separately) The Active TV Splitter Module is designed for internal house coaxial cabling to provide television antenna and AV modulated signals to different rooms. The F Type connectors offer a convenient and secure connection for all coaxial cables including the 12VDC Power Cable.
- Page 18 Hills Antenna Home Hub Modules Active TV Splitter Module Part Number S2707 Cable connections for the S2707 Active TV Splitter Module FTA Antenna Television Outlets Television Outlets 12VDC Power Supply Modulator Recommended parts: • TRU-Series Antenna • RG6 Quad Shield Coaxial Cable •...
- Page 19 Hills Antenna Home Hub Modules Active TV Splitter Module Part Number S2707 Cable preparation will depend on the Enclosure mounting method, (refer to earlier chapters regarding surface or flush mounting options. Our example installation assumes we are surface mounting the Enclosure to an internal plaster board wall.
- Page 20 Hills Antenna Home Hub Modules Active TV Splitter Module Part Number S2707 Connect the input cables to the outlet and secure to the Mounting Block. Example shows the antenna cable from the roof top antenna and HDMI cable from the source device (PayTV Box) located in another room.
- Page 21 Hills Antenna Home Hub Modules Active TV Splitter Module Part Number S2707 Place the S2707 Active TV Splitter Module on the 24HHOF Open Frame and secure with the four plastic rivets supplied. Ensure the module is securely fixed in place before attaching cables.
- Page 22 The 24HHDIN DIN Rail is available for use to fit any device that requires this mounting method. This accessory item comes with 2 x DIN Rails and 8 x Plastic Mounting Rivets. It can be mounted to any of the 3 Frames supplied with the Hills Antenna Home Hub. Page 22...
- Page 23 For use with Bosch Alarm Systems, a specially designed mounting plate has been designed to suit the Hills Antenna Home Hub. The Gear Tray has 3 different mounting locations for the plate, top middle and lower as shown in the pictures below. All 3 positions allow for easy neat cabling between the Enclosure and the Gear Tray.
- Page 24 Version 20231206 © Bitek Pty Ltd Page 24...
Need help?
Do you have a question about the 24HH720 and is the answer not in the manual?
Questions and answers