Related Manuals for Avigilon H4PTZ-D Series
Summarization of Contents
Introduction
System Requirements
Browser and system requirements for accessing the web interface.
Other Web Interface Guides
Links to other related Avigilon camera interface guides.
Accessing the Camera Web Interface
Creating the Initial User and Logging In
Steps to create the first administrator user and log in.
Logging In
Process for logging into the camera's web interface using credentials.
Live View
Using the Camera Zoom and Focus Controls
How to control camera zoom and focus via the web interface.
Using Camera Presets
Saving and recalling camera positions for quick access.
Adding a Camera Preset
Procedure to create a new saved camera position.
Moving the Camera to a Preset Position
How to select and activate a saved camera position.
Deleting a Preset
Removing a previously saved camera position.
Using the PTZ Camera Controls
Detailed controls for PTZ camera movement and functions.
Activating the IR PTZ Camera Washing Sequence
Initiating the camera lens cleaning sequence.
Saving a Still Image
Capturing a snapshot of the live video stream to the SD card.
Setup
General
Configuring basic camera identity, name, location, and operational modes.
Network
Setting up IP addresses, DNS, NTP, and network connectivity parameters.
Configuring 802.1x Port-Based Authentication
Setting up network authentication credentials for switch access.
Switching 802.1x Authentication Profiles
Selecting between configured network authentication profiles.
Deleting an 802.1x Authentication Profile
Removing a network authentication profile.
Configuring SNMP
Setting up Simple Network Management Protocol for status monitoring.
IP Filter
Controlling network access by specifying allowed or denied IP addresses.
Security Settings
Configuring encryption and security compliance standards like FIPS.
Managing Certificates
Procedures for handling digital certificates for authentication and encryption.
Downloading Certificates
Exporting installed certificates from the camera.
Removing Certificates
Deleting certificates from the camera.
Downloading Certificate Signing Requests
Generating and exporting CSRs for obtaining certificates.
Uploading Certificates
Installing certificates and private keys onto the camera.
Uploading CA Certificates
Installing root or intermediate certificates for trust.
Creating Certificates
Generating new self-signed certificates for the camera.
Image and Display
Adjustments
Tuning video image parameters like saturation, sharpness, and brightness.
Compression and Image Rate
Configuring video stream quality, resolution, and frame rate.
Enabling HDSM SmartCodec™ Technology Settings
Optimizing bandwidth usage by intelligently compressing video.
Viewing the RTSP Stream URI
Obtaining the address for streaming video via RTSP.
Accessing the Still Image URI
Retrieving the URL for the camera's last captured still image.
HDSM SmartCodec Technology Advanced Settings
Fine-tuning HDSM SmartCodec for motion and idle scenes.
Streaming Settings
Motion Detection
Defining areas and sensitivity for motion event triggering.
Tamper Detection
Configuring camera tamper detection sensitivity and delay.
Analytics
Setting up self-learning video analytics for object detection.
Suspending Self Learning
Temporarily disabling analytics learning for specific scenarios.
Resetting Self Learning
Clearing learned data and restarting the analytics learning process.
Extended Settings
Configuring ONVIF settings and other advanced features.
Privacy Zones
Setting a Privacy Zone
Procedure to draw and configure a privacy zone.
Deleting a Privacy Zone
Removing a configured privacy zone.
Storage
Enabling Onboard Storage
Configuring the camera to record video to an SD card.
ONVIF Profile G
Using the ONVIF standard for retrieving video from storage.
Downloading Recorded Video from the Web Interface
Retrieving recorded video files via the web interface.
Downloading Recorded Video from the SD Card
Retrieving recorded video files using an SD card reader.
Deleting Recorded Video
Removing recorded video files from the SD card.
SD Card Failures
Information on handling and recovering from SD card issues.
Digital Inputs and Outputs
Configuring external devices connected to the camera's I/O ports.
Users
Adding a User
Creating new user accounts with specific permission levels.
Editing Users and Passwords
Modifying existing user accounts and credentials.
Removing a User
Deleting user accounts from the camera.
Keeping Usernames and Passwords After Firmware Revert
Retaining user credentials after a firmware update.
System
Upgrading the Camera Firmware
Process for updating the camera's firmware to a newer version.
Device Log
Viewing system and access logs for monitoring and diagnostics.
About
Checking a Camera's Power Source
Verifying the camera's active power source.
PTZ Camera
Creating PTZ Tours
Setting up automated sequences of PTZ camera movements.
Editing PTZ Tours
Modifying existing automated PTZ camera movement sequences.
Defining PTZ Limits
Restricting camera pan, tilt, and zoom movements to specific ranges.
Enabling the PTZ Compass Overlay
Displaying directional information on the video feed.
Troubleshooting
Video Does Not Display After Powering the Camera
Resolving issues with video not appearing after camera startup in cold environments.
Need help?
Do you have a question about the H4PTZ-D Series and is the answer not in the manual?
Questions and answers