Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Palax C750.2 Pro
Summarization of Contents
5 Operating Conditions
5.1 Ambient Conditions of Use
Guidelines for operating the machine in various environmental conditions.
6 Safety
6.1 Signal Words and Symbols
Explanation of hazard, prohibition, and mandatory action symbols used in the manual.
6.2 Safety Risks
Identifies potential dangers and operator responsibilities for safe operation.
7 Technical Data
7.1 Product Identification (Nameplates)
Details on identifying the machine using its nameplate and QR codes.
7.2 Main Dimensions
Specifications for the machine's weight, height, width, and length.
7.5 Operating Controls Pro / Pro+
Description and illustration of controls for Pro and Pro+ models.
8 Transport Information
8.1 Delivery Acceptance Inspection
Procedure for checking the machine upon delivery for damage or missing parts.
8.2 Unpacking
Instructions for safely unpacking the machine and its components.
8.3 Lifting
Guidelines and warnings for safely lifting the heavy machine using a crane or forklift.
9 Assembly
9.1 Set Conveyor to Operating Position
Step-by-step guide to position the conveyor for operation.
9.2 Set Conveyor to Transport Position
Instructions for preparing the conveyor for safe transport.
9.3 Adjust Log Stop
Guidance on setting the log-stop for desired log lengths.
10 Operation
10.1 General Operation Guidelines
General advice and warnings for operating the machine with different log types.
10.2 Alternative Power Sources
Information on using PTO or electric motor as power sources.
10.3 PTO Powered Operation
Detailed instructions for operating the machine using the PTO.
10.4 Electric Motor Powered Operation
Detailed instructions for operating the machine using an electric motor.
11 Circular Saw Blade Operation
11.1 Before Blade Operation
Preparation steps before using the circular saw blade.
11.2 During Blade Operation
Safe operating procedures while using the circular saw blade.
11.3 Cutting to Equal Length (Ergo)
Specific procedure for cutting logs to equal lengths on the Ergo model.
11.4 Last Log Operation
Techniques for safely processing the final piece of a log.
12 Hydraulic Control (Pro/Pro+)
12.1 Safety Device Troubleshooting
Troubleshooting and solutions for safety device related issues.
12.2 Joystick Operation
How to operate the machine using the joystick controls.
12.3 Saw Blade Feed Rate Adjustment
Adjusting the feed rate of the circular saw blade.
12.4 Splitting Lever Operation
Operation of the lever used for the splitting function.
13 Mechanical Control (Ergo)
13.1 Safety Device Overview
Information regarding safety devices on the Ergo model.
13.2 Multifunction Lever Usage
Operation and installation of the multifunction lever.
13.3 Splitting Wedge Lever Adjustment
Procedure for installing and adjusting the splitting wedge lever.
14 Maintenance Instructions
14.1 Cleaning and Lubrication
Covers cleaning the machine, conveyor, and lubricating key components.
14.3 Hydraulic and Gear Oil Management
Procedures for changing hydraulic oil and angular gear oil.
14.8 Saw Blade Maintenance
Detailed steps for saw blade maintenance, including replacement and sharpening.
14.9-14.12 V-Belt Maintenance
Procedures for tightening and replacing V-belts on different machine shafts.
17 Accessories
17.1 Automatic High-Speed Valve
Explanation of the automatic high-speed valve and its function.
17.2 Splitting Wedges
Description of different splitting wedge types available.
17.3 Splitting Cylinder Options
Information on available splitting cylinder options.
17.4 Log Table or Stand
Recommendations for log tables or stands to improve operation.
Need help?
Do you have a question about the C750.2 Pro and is the answer not in the manual?
Questions and answers