The address code of each LED is programmed by switches.
See the following tab to have the dipswitches position in relation with address
code.
Dipswitches
1 ON
1
Value
Each LED PLLEDSP needs four loops of DMX-512 to control, the table of the loop
control function. The relative functions are described in the following tab:
CHANNEL
0 OFF
1
1 – 127 Strobe effect (from slow to fast)
128 – 255 Dimmer effect
2
0 – 255 red LED luminance control
3
0 – 255 green LED luminance control
4
0 – 255 blue LED luminance control.
When you have several LED spotlights connected all together, remember that
each spotlight takes 4 channels, so the first one address code should be set as 1,
the second one as 5, the third one as 9 and so on.
2 ON
3 ON
4 ON
2
4
8
17
5 ON
6 ON
16
32
FUNCTION
7 ON
8 ON
9 ON
64
128
256