Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Simrig SR3
Summarization of Contents
Parts List
Cables Included
Lists all included cables, such as power, USB, and actuator cables.
Hardware Components
Enlists all screws, nuts, washers, and other hardware required for assembly.
Electronic Control Unit (ECU)
ECU Fuses and Indicators
Details the ECU's fuses, their rating, replacement, and LED indicators.
ECU Cooling System
Explains the ECU's temperature-controlled fan and cooling mechanism.
ECU Ports Overview
Describes the function and location of all ports on the ECU.
Emergency Stop System
Emergency Stop Error Code
Explains error code 13 related to the emergency stop being unconnected or activated.
Assembly Guide
Assembly Tools and Materials
Lists the necessary tools and items required for the assembly process.
Measurement Units
States that all measurements in the manual are metric by default.
Pre-Assembly Preparation
Provides essential safety and preparation steps before beginning assembly.
Install Actuators with 780x20x20 Profiles
Guides the installation of actuators onto the rig using specific aluminium profiles.
Turn Rig Around
Instructs on how to turn the rig over and position it for further assembly steps.
Install Support Brackets for 120x40 and 160x40 Rigs
Details the process of installing support brackets for 120x40 and 160x40 rig sizes.
Install Support Brackets for 80x40 and 40x40 Rigs
Guides the installation of support brackets for 80x40 and 40x40 rig sizes.
Install Actuators Using EasyBracket
Explains the method for mounting actuators using the EasyBracket system.
Instructions for 40x80 Rigs
Specific instructions for attaching support brackets to actuators on 40x80 rigs.
Instructions for 40x160 Rigs
Specific instructions for attaching support brackets to actuators on 40x160 rigs.
Actuator Alignment and Adjustments
Details how to correctly align all four actuators in a rectangular configuration.
Install Electronic Control Unit
Guides the user on placing and securing the Electronic Control Unit (ECU) to the rig.
Install Emergency Stop Button
Explains the mounting and connection procedure for the emergency stop button.
Electrical Connections
Guides the user through connecting all electrical components of the motion system.
Adjust Load Distribution
Describes how to adjust load distribution for optimal motion system performance and lifespan.
Software and Driver Installation
Initial Software Launch
Guides the initial launch and interface of the SIMRIG Control Center software.
Game Configuration
Explains how to configure various games to work with the motion system.
Understanding Motion Profiles
Discusses the importance and function of vehicle-specific profiles for motion simulation.
Using the Axis Tester Tool
Describes the Axis Tester tool for verifying motion system functionality.
Using the Load Estimator Tool
Explains how to use the Load Estimator to measure system load distribution.
Maintenance and Care
Cleaning Procedures
Provides instructions for cleaning the motion system components safely.
Periodic System Checks
Outlines regular checks for screws, cables, connectors, and the emergency stop.
Fuse Replacement Guide
Details the procedure for replacing fuses within the Electronic Control Unit (ECU).
Technical Support Information
Manufacturer Contact Details
Provides contact details and support hours for the manufacturer, SIMRIG AB.
Need help?
Do you have a question about the SR3 and is the answer not in the manual?
Questions and answers