Related Manuals for Hitachi ZAXIS 50U-2
Summarization of Contents
Safety
Recognize Safety Information
Alerts to safety symbols and recommends following precautions for personal safety.
Understand Signal Words
Explains hazard level signal words (DANGER, WARNING, CAUTION, IMPORTANT, NOTE) and their meanings.
Follow Safety Instructions
Emphasizes reading safety signs, maintaining them, and allowing only trained personnel to operate.
Prepare for Emergencies
Advises on having first aid kits, fire extinguishers, and emergency contact numbers ready.
Wear Protective Clothing
Lists necessary protective gear like hard hats, safety belts, and advises against loose clothing or distractions.
Protect Against Noise
Warns about hearing impairment from loud noise and recommends hearing protection.
Inspect Machine
Stresses the importance of repairing any found abnormalities before operation.
Tidy Up Inside Operator's Space
Guidelines for keeping the cab clean to prevent accidents, including removing mud and avoiding hazards.
Use Handholds and Steps
Provides instructions for safe mounting and dismounting, emphasizing three-point contact and clean steps.
Operating the Engine
Before Starting Engine
Details pre-start checks and procedures for the engine.
Starting Engine
Covers the process of starting the engine in different temperature conditions.
Check Machine After Starting Engine
Lists essential checks to perform immediately after the engine starts.
Driving the Machine
Travel Levers and Pedals
Explains the function and operation of travel controls.
Travel Mode Switch
Details the operation and purpose of the travel mode selection.
Traveling on Soft Ground
Provides advice and precautions for driving on soft or unstable terrain.
Towing Machine
Instructions and safety measures for towing the machine.
Precautions for Traveling on Slopes
Safety guidelines for operating the machine on inclined surfaces.
Parking and Stopping on Slopes
Procedures for safely parking and stopping the machine on slopes.
Operating the Machine
Control Lever Operation
Details the operation of control levers, including different patterns and options.
Blade Operation Precautions
Safety guidelines for operating the machine's blade attachment.
Warming Up Operation
Procedures for warming up the machine, including in cold weather.
Operating Backhoe and Grading
Instructions for performing backhoe operations and grading tasks.
Avoid Abusive Operation
Warnings against improper operation that could damage the machine.
Precautions for Installing Wide Bucket
Guidelines for safely installing special or wide bucket attachments.
Crusher Operation
Instructions for operating the optional crusher attachment.
Emergency Boom Lowering Procedure
Steps to safely lower the boom in an emergency situation.
Transporting
Transporting by Road
Guidelines for transporting the machine via road.
Trailer Loading/Unloading
Procedures for safely loading and unloading the machine onto a trailer.
Securing Machine to Trailer
Instructions on how to properly secure the machine for transportation.
Lifting Machine with Crane
Safety procedures for lifting the machine using a crane.
Maintenance
Maintenance Procedures
Overview of maintenance tasks and general procedures.
Daily Inspection
Checklist for daily inspections to ensure proper machine function.
Greasing
Details on greasing points and procedures for various components.
Engine Maintenance
Procedures for engine oil, filter replacement, and related maintenance.
Hydraulic System Maintenance
Instructions for checking and maintaining hydraulic oil, filters, and lines.
Fuel System Maintenance
Procedures for fuel tank, water separator, and fuel filter maintenance.
Air Cleaner Maintenance
Steps for cleaning and replacing the air cleaner element.
Cooling System Maintenance
Guidance on checking coolant levels, fan belts, and coolant changes.
Miscellaneous Maintenance
Covers various other maintenance checks like bucket teeth, seat belts, and air conditioners.
Preparation for Inspection and Maintenance
Steps to take before starting any inspection or maintenance work.
Storage
Storing the Machine
Instructions for properly storing the machine when not in use.
Removing Machine From Storage
Procedures for preparing a stored machine for operation.
Specifications
Specifications
Provides detailed technical specifications for the machine.
Working Ranges
Details the operational working ranges for the excavator.
Shoe Types and Applications
Information on different track shoe types and their usage.
Bucket Types and Applications
Details various bucket types and their appropriate applications.
Reference
Additional Counterweight
Information related to the use of additional counterweights.
Need help?
Do you have a question about the ZAXIS 50U-2 and is the answer not in the manual?
Questions and answers