Advertisement
Quick Links
Advertisement
Related Manuals for Sykes CP150iC
Summarization of Contents
5 HOW TO READ A PERFORMANCE CURVE
5.4 Cavitation
Explains cavitation, its causes, and its effects on pump performance and components.
9 SITE COMMISSIONING PROCEDURE
9.2 Installation and Set Up
Covers general setup requirements, including suitability, leveling, accessibility, and risk assessment.
9.3 Suction Hose Set Up
Provides guidelines for correctly setting up the suction hose for optimal performance.
9.4 Discharge Hose / Pipe Set Up
Details the correct setup procedures for discharge hoses and pipes.
9.5 Pre-Start Checks
Lists essential checks to perform before starting the pumpset.
9.6 Starting Procedure
Outlines the step-by-step procedure for starting the pumpset.
11 PUMP OPERATING INSTRUCTIONS
11.2 Procedure Prior to Pump Start Up
Details the steps to follow before initiating pump start-up.
11.3 Failure to Prime Pump
Addresses issues related to the pump failing to prime.
12 PUMP MAINTENANCE INSTRUCTIONS
12.1 Pump Maintenance Schedule
Presents a schedule for routine pump maintenance tasks at various intervals.
12.2 Bolts, Studs and Nuts Torque Setting
Lists recommended torque settings for bolts and studs used in pump builds.
12.3 Pump Internal Clearance Setting
Specifies the correct internal clearances and end float settings for pump components.
12.4 General Pump Inspection Procedure
Outlines the procedure for conducting a general inspection of the pump.
12.5 Pump Assembly Instructions
Provides detailed instructions for assembling the pump.
12.6 Yakka Basic Assembly Procedure
Lists the steps for the basic assembly of the Yakka pumpset.
12.7 Air Compressor
12.7.2 General Description
Describes the application, features, and general specifications of the air compressor.
12.7.6 Operation
Provides instructions for the general operation of the compressor.
12.7.8 Piping
Covers piping recommendations and warnings for the compressor system.
12.7.10 Maintenance
Explains valve maintenance and general safety precautions for compressor work.
13 PUMP DIAGNOSTICS
13.1 Trouble Shooting Guide
Lists common pump system problems and their likely causes.
15 PARTS LIST
15.1 Recommended CP150i Pump Spare Parts
Details spare parts for the CP150i pump with part numbers and quantities.
15.3 Bearing Bracket and Shaft Parts List
Provides an exploded view and list of parts for the bearing bracket and shaft.
15.5 Compressor Parts List
Displays an assembly drawing and list of parts for the compressor.
15.9 Yakka Pump and Engine Parts List
Shows an assembly drawing of the Yakka pump and engine.
20 MISCELLANEOUS ENGINEERING INFORMATION
20.1 Main Factors Affecting Pump Suction Lift
Discusses factors like altitude and temperature that influence pump suction lift.
20.2 Pump Suction Pipe Velocity
Explains the importance of suction pipe velocity for satisfactory suction lift.
Need help?
Do you have a question about the CP150iC and is the answer not in the manual?
Questions and answers