Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HITZE TRIBOX TRI80x35x53
Summarization of Contents
General Safety Warnings
Burn Hazard and Hot Surfaces
Warns that fireplace glass and components can be very hot. Avoid touching until cooled.
Child and Animal Supervision
Never leave children/animals unattended with a burning or cooling fireplace.
Flammable Material Placement
Keep flammable items a safe distance from the hot insert and cover.
User Responsibilities and Precautions
Inform users about heat, read manual, ensure ventilation, check load capacity, use specialists.
Product Introduction and Specifications
Brand Philosophy and Features
Explains HITZE's brand philosophy focusing on natural heating, modern design, and high efficiency.
Installation Dimensions
Provides a table with detailed dimensions (A-L, X) for different HITZE fireplace models.
General Information and Regulations
Covers rigidity checks, chimney inspection, compliance with regulations, authorized installation, and permits.
Safety Guidelines and Precautions
Details safety rules for operating the fireplace, including handling hot surfaces and flammable materials.
Initial Setup and Checks
Instructs to check shipment contents for damage and ensure all necessary components are present.
Cover Installation Requirements
Details that the cover must be installed only on its dedicated insert and according to legal requirements.
Location Selection Criteria
Advises planning location based on chimney, checking floor load capacity, and preparing a non-combustible base.
Connection Procedures
Emphasizes compliance with regulations and manual instructions for connecting the installation and operation.
Panel Markings Explained
Explains special cutouts on panels that indicate their location and the insert model they belong to.
TRINITY BOX COVER Installation Manual
Step 1: Adjusting Fireplace Height
Adjust the legs of the fireplace insert using the foot adjustment screw for correct height.
Step 2: Connecting Flue and Air Inlet
Connect the flue to the chimney and the air inlet to the insert.
Step 3: Attaching Vertical Brackets
Screw two vertical brackets (left and right) using M5x6 screws.
Step 4: Securing Brackets to Insert
Attach left/right vertical brackets to the insert using M10x25 screws/nuts and M8x20 screws/nuts.
Step 5: Installing Front and Bottom Supports
Install front vertical supports and bottom supports, attaching them to the insert legs and vertical brackets.
Step 6: Fixing Lower Back Support
Fix the lower back support between the left and right vertical supports using M5x6 screws.
Step 7: Fastening Lower Front Bracket
Fasten the lower front bracket using M8x20 screws and M8 nuts.
Step 8: Fixing Middle Back Support
Fasten the middle back support between the left and right vertical supports using M5x6 screws.
Step 9: Installing Lower Cover
Slide the lower cover below the air throttle cable cover and screw it in using M5x6 screws.
Step 10: Attaching Tension Eye
Fasten the tension eye to the cartridge using M8x20 screw and M8 nut.
Step 11: Assembling Upper Cover Structure
Assemble the upper cover using provided elements and connecting fasteners.
Step 12: Securing Upper Cover to Insert
Assemble the upper cover to the insert using M10x25 screws/nuts and M6x60/M5x16 bolts.
Step 13: Installing Bottom Left Panel
Assemble the bottom left panel (marked 2) onto hinges using M5x10 screws.
Step 14: Installing Bottom Front Panel
Assemble the bottom front panel (marked 1) onto hinges.
Step 15: Installing Bottom Right Panel
Assemble the bottom right panel (marked 3) onto hinges using M5x10 screws.
Step 16: Mounting Panel Hooks
Mount hooks on panels marked with numbers 6 and 7 using M5x6 and M5x10 screws.
Step 17: Assembling Left Middle Panel
Assemble the left middle panel (marked 6) onto the upper masking plate using M5x10 screws.
Step 18: Assembling Right Middle Panel
Assemble the right middle panel (marked 7) onto the upper masking plate using M5x10 screws.
Step 19: Installing Central Front Panel
Install the central front panel (marked 5) into panel hinges 6 and 7.
Step 20: Assembling Left Decor Panel
Assemble the left decor panel (L) by sliding it onto the hinges.
Step 21: Assembling Right Decor Panel
Assemble the decor panel right (P) by sliding it onto the hinges.
Step 22: Installing Front Decor Panel
Install the front decor panel (F) by sliding it onto the hinges.
Step 23: Connecting Decor Panels
Fasten the connector of decor L and P panels using M5x6 screws.
Step 24: Installing Cover Hooks and Brackets
Install cover hooks and brackets on panels marked 9 and 10 using M5x6 and M5x10 screws.
Step 25: Assembling Upper Left Panel (9)
Assemble upper left panel (9) onto the left decor panel and slide to catch hinges.
Step 26: Assembling Upper Left Panel (10)
Assemble upper left panel (10) onto the right decor panel and slide to catch hinges.
Step 27: Installing Upper Front Panel (8)
Install upper front panel (8) by inserting hinges into mounting holes on panels 9 and 10.
Step 28: Securing Front and Back Cover Brackets
Screw the front and back cover brackets using M5x6 screws.
Step 29: Installing Side Panels (4)
Install panels on side number 4 on the left and right sides.
Step 30: Placing Upper Covers
Put on the upper covers.
Step 31: Installing Rear Lower Cover
Put on the rear lower cover.
Step 32: Installing Rear Upper Covers
Put on the rear upper covers.
Step 33: Cover Installation Complete
Indicates the completion of the cover installation process.
Need help?
Do you have a question about the TRIBOX TRI80x35x53 and is the answer not in the manual?
Questions and answers