Related Manuals for NoiseKen INS-4040
Summarization of Contents
Instruction Manual
NoiseKen Impulse Noise Simulator INS-4020/4040
Manual for the NoiseKen Impulse Noise Simulator, Model INS-4020/4040.
Important Notices and Disclaimers
Content Disclaimer and Reproduction Policy
States that booklet contents may change and reproduction requires permission.
Liability Limitations for Product Use
Outlines Noise Laboratory's liability limitations for product misuse or modification.
Important Safety Precautions
User Qualification and Prohibited Environments
Specifies use by trained technicians and prohibits use in explosive areas.
Device Compatibility and Power Cable Requirements
Warns about pacemakers and specifies AC power cable requirements.
Instruction Manual Ordering
Application Form for Manual Request
Provides a form to order an instruction manual, including applicant details and company address.
Preface
Manual Overview and Usage Recommendations
Explains the manual's purpose for operation and maintenance of the Impulse Noise Simulator.
Basic Safety Precautions
Understanding Safety Symbols and Warnings
Explains safety signs, danger, warning, and caution indicators used in the manual.
Critical Safety Guidelines for Operation
Details critical safety rules regarding pacemakers, explosive areas, and grounding.
Coaxial Connector Usage and Identification
Details the specific NMHV connectors, their identification, and risks of misconnection.
General Description
Key Features of the Simulator
Lists the main features and capabilities of the Impulse Noise Simulator.
Included Accessories
List of Supplied Items
Details the accessories included with the product, with quantities and descriptions.
Controls and Display Functions
Front Panel Connectors and Terminals
Describes the various input and output connectors and terminals on the front panel.
Front Panel Controls and Indicators
Explains the functions of buttons, displays, and indicators on the front panel.
Rear Panel Connections
Details the AC INPUT, PE, and EUT LINE INPUT connections on the rear panel.
Operation
Operating Precautions and Power Management
Covers horizontal placement, connector checks, and turning the unit ON/OFF.
Setting Pulse Width and Connections
Details how to set pulse widths using coaxial cable connections between width connectors.
Operation Modes: PHASE, VARIABLE, 1 SHOT
Explains how to operate the unit in PHASE, VARIABLE, and 1 SHOT modes.
External Trigger Mode Operations
Details synchronization with external signal generators, zero-cross signals, and contact switches.
Operation for Wide Application
VOLTAGE Ramp Setting and Test Run
Describes how to set and run automatic voltage ramping tests.
VARIABLE Ramp Setting and Test Run
Explains setting and running automatic pulse repetition period ramping tests.
PHASE Ramp Setting and Test Run
Details setting and running automatic phase angle ramping tests.
Memory Function for Settings
Describes how to save and recall current settings for voltage, phase, and ramp modes.
Test Set-ups and Environment
Precautions for Use and Test Parameters
Lists precautions and parameters to consider for testing.
Recommended Test Set-ups
Provides examples of test set-ups for various modes, including grounding and isolation.
Specifications
Product Specifications Table
Details electrical and environmental specifications for the product.
Consumable Parts Identification
Identifies consumable parts like coaxial cables, connectors, and mercury relays.
Waveform Check
Required Instruments and Settings
Lists necessary instruments like oscilloscopes and attenuators, and their settings.
Checking Output Waveform and Relay Status
Guides on how to check the output waveform and identify potential relay issues.
Relay Unit Maintenance
Relay Unit Types and Replacement Procedure
Identifies 2kV and 4kV relay units and provides steps for replacing the mercury relay.
Phase Angle Correction
Procedure for Setting Phase Angle Correction
Details the step-by-step process to adjust and correct phase angle errors.
Cancelling Phase Angle Correction
Explains how to reset or cancel the applied phase angle corrections.
Warranty Information
Servicing Terms and Conditions
Outlines the terms for servicing, including scope, fees, and liability.
Limited Warranty Scope and Exclusions
Specifies the warranty period, scope, and common exclusions like consumable parts and misuse.
Maintenance
User-Side Maintenance Guidelines and Restrictions
Restricts user maintenance to cleaning and functional checks, advising against opening the unit.
Support Network
Troubleshooting and Return Procedures
Guides on reporting symptoms and returning products for repair or service.
Need help?
Do you have a question about the INS-4040 and is the answer not in the manual?
Questions and answers