Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-KIS702
Summarization of Contents
Legal Information
About this Manual
Explains the purpose, scope, and version update policy of the manual.
Trademarks
Lists Hikvision's trademarks and acknowledges other third-party trademarks.
Disclaimer
Outlines limitations of warranty, liability, and user responsibilities.
Symbol Conventions
Symbol Definitions
Defines symbols like Danger, Caution, and Note used throughout the document.
Local Operation
1.1 Activate Indoor Station
Steps to activate the indoor station by creating a password for device activation.
1.2 Configuration Settings
Overview of essential configuration settings for the indoor station's operation.
1.2.1 Set Indoor Station Network Parameters
Configures network connection by setting IP address, subnet mask, and gateway.
1.2.2 Set Linked Device IP
Sets network parameters for linked devices like door stations and main stations.
1.2.3 Set Indoor Station No.
Assigns intercom numbers to the indoor station and its extensions for dialing.
1.2.4 SIP Settings
Configures SIP protocol, register password, and VIOP account for communication.
1.2.5 Add Camera
Steps to add IP cameras to the indoor station system.
1.2.6 Zone and Alarm Settings
Configures zone types, alarm types, and delay times for up to 8 zones.
1.3 Password Settings
Creates and manages arm/disarm, unlock, and duress code passwords.
1.4 Synchronize Time
Configures time synchronization using NTP server settings.
1.5 Sound Settings
Sets ringtone sound, volume levels for microphone, prompt, and call.
1.5.1 Call Settings
Configures ringtone duration, call forwarding time, and Do Not Disturb function.
1.5.2 Volume Settings
Adjusts microphone volume, prompt sound volume, and call volume.
1.6 Link to the Mobile Client
Connects the indoor station to the mobile client via Hik-Connect service.
1.7 Restore Indoor Station
Restores the indoor station to its default factory settings and reboots.
1.8 System Maintenance
Performs system maintenance tasks like TF card formatting and screen cleaning.
1.9 Device Information
Displays the device version, model, serial number, and open source disclaimer.
Remote Operation via Client Software
2.1 Activate Device Remotely
Activates the device remotely using the iVMS-4200 client software.
2.2 Device Management
Overview of device activation, addition, editing, and deletion via client software.
2.2.1 Add Video Intercom Devices
Guides on adding online or offline video intercom devices to the client software.
2.2.2 Modify Network Information
Modifies the network parameters of a selected device from the device list.
2.3 System Configuration
Configures video intercom parameters such as ringtone and speaking durations.
2.4 Remote Configuration
Accesses various remote configuration pages for device settings.
2.4.1 System
Accesses device information, general settings, time, and system maintenance remotely.
2.4.2 Video Intercom
Configures video intercom specific settings like device ID and time parameters.
Device ID Configuration
Configures the device type, room number, and floor number for identification.
Time Parameters
Sets maximum ring duration, live view duration, and call forwarding time.
Permission Password
Allows changing the arm/disarm password for the indoor station.
Zone Alarm
Configures zone number, type, alarm type, and delay settings for alarms.
IP Camera Information
Adds, deletes, and modifies IP cameras, including stream source and credentials.
Volume Input and Output
Adjusts volume levels for microphone input, output, and talk volume.
Ring Import
Imports custom ringtone files in WAV format for the device.
Incoming Call Linkage
Configures linkage for incoming calls to trigger alarms or relay outputs.
2.4.3 Network
Configures the local network parameters for the indoor station.
Linked Devices Network Configuration
Configures network parameters for linked devices like main stations and SIP servers.
DNS Settings
Sets the primary and secondary DNS server IP addresses.
Configure Mobile Client Connection
Sets up Hik-Connect server parameters for mobile client access.
2.5 Person Management
Manages organizations and persons for intercom and access control functions.
2.5.1 Organization Management
Adds, edits, and deletes organizational structures and levels.
2.5.2 Person Management
Adds, edits, and manages individual person details, including credentials.
Communication Matrix and Device Command
Communication Matrix
Provides a QR code to access the device communication matrix.
Device Command
Provides a QR code to access device common serial port commands.
Need help?
Do you have a question about the DS-KIS702 and is the answer not in the manual?
Questions and answers