Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Traxxas 68154-4
Summarization of Contents
INTRODUCTION
Traxxas Support
Contact information and support options for user assistance.
Quick Start Guide
Procedures for getting the model running quickly.
Register Your Model
Process for registering the product online.
FCC Compliance
Regulatory information regarding radio frequency devices.
BEFORE YOU PROCEED
Support Information
Contact details and support resources for assistance.
Warnings, Hints, and Cross-References
Icons and symbols used for warnings and helpful information.
SAFETY PRECAUTIONS
Important Points to Remember
Key safety considerations for operating the model.
Speed Control & Battery Precautions
Safety guidelines for ESC, motor, and battery handling.
LiPo Battery Handling & Charging
Critical safety information for Lithium Polymer batteries.
General Battery Charging & Handling
Safety rules for charging and handling all battery types.
TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT
Supplied Tools and Equipment
Tools included with the model.
Required Equipment
Items necessary for operation and maintenance.
Recommended Equipment
Optional but useful items for an RC toolbox.
ANATOMY OF THE SLASH 4X4 BRUSHLESS
Model Component Identification
Diagram labeling major parts of the Slash 4X4 Brushless.
QUICK START: GETTING UP TO SPEED
Initial Setup and Operation Guide
Numbered steps for initial model setup and operation.
TRAXXAS TQ 2.4GHz RADIO SYSTEM
Introduction and Terminology
Overview of the radio system and key terms.
Radio System Precautions
Critical safety guidelines for the antenna and radio system.
Transmitter Battery Installation
Instructions for powering the transmitter.
Battery and Charger Selection
Guidance on choosing compatible battery packs and chargers.
Model Body and Battery Pack Installation
Procedures for attaching the body and inserting the battery.
Antenna Setup and Radio Operation
Proper antenna installation and basic operation.
Transmitter Controls, Rules, and Adjustments
Understanding controls, rules, and performing basic adjustments.
Radio System Usage and Range Testing
Verifying controls and ensuring radio functionality at a distance.
Failsafe and Binding Procedures
Understanding failsafe and binding the transmitter/receiver.
ADJUSTING THE ELECTRONIC SPEED CONTROL
BL-2s Battery Settings and Calibration
Configuring ESC for batteries and calibrating with the transmitter.
BL-2s Profile Selection and Modes
Choosing between Sport, Race, and Training modes.
ESC LED Codes and Protection Modes
Understanding ESC status indicators and protections.
DRIVING YOUR MODEL
Driving Precautions and Run Time Tips
Safety tips, run time factors, and methods to increase duration.
Running in Wet Conditions and Maintenance
Guidelines for wet operation and post-run maintenance.
RECEIVER BOX: MAINTAINING A WATERTIGHT SEAL
Receiver Box Maintenance Procedures
Removing and installing the receiver while maintaining seal.
ADJUSTING YOUR MODEL
Gear Mesh, Slipper Clutch, and Shocks
Adjusting gears, slipper clutch, and suspension for performance.
Servo, Motors, Gearing, and Differentials
Centering servo, understanding gearing, and tuning differentials.
Differential Removal and Refilling
Steps to remove and refill differential assemblies.
MAINTAINING YOUR MODEL
Routine Vehicle Inspection and Periodic Maintenance
Checks for damage, wear, and regular upkeep tasks.
Storage Procedures and Assembly Removal
Proper storage methods and instructions for removing parts.
Need help?
Do you have a question about the 68154-4 and is the answer not in the manual?
Questions and answers