Advertisement

11-92
1192
12592
125T92
13536SBK
13592SBK
14596
AB12591
AB12592
BL12536SB
BL12592SB
BM11M91
BM11M92
GC1138
GE1138
MBA1396
Instruction manual
Please read these instructions care-
ful ly and make sure you un der stand
them before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d'instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avoir tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones antes
de usar esta maquina.
MBA15107
MC115T96
MC11T96
MC11T96K
P1192
P115T92
P1292
PO1192
RE1196
RE11T96
RE1238
RE1238K
RE12596
REB1192
REN1192
REQ1192
01533
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
machine gebruikt.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P1292 and is the answer not in the manual?

Questions and answers

Summarization of Contents

1. Safety Rules
I. Training
Guidance on operator responsibilities and requirements for safe operation.
II. Preparation
Pre-operation checks, fuel handling, and area inspection for safe mowing.
III. Operation
Safe operating procedures, slope limits, traffic awareness, and shutdown.
IV. Maintenance and Storage
Guidelines for keeping the equipment in safe working condition and proper storage.
2. Assembly.
STEERING WHEEL
Instructions for mounting the steering wheel and related components for proper assembly.
Seat
Procedure for installing and adjusting the tractor seat for proper operator positioning.
Install Mulcher Plate (if equipped)
Instructions for installing the mulcher plate for bagging or discharging grass.
3. Functional description.
Positioning of controls
Overview of tractor controls, including location and function of levers, pedals, and switches.
Light switch position (if equipped)
How to operate the tractor's light switch, if equipped.
Throttle control
How to adjust engine speed and blade rotation using the throttle control.
Throttle and choke control (if equipped)
Operating engine speed and choke for starting and running.
Brake and clutch pedal
How to use the combined brake and clutch pedal for stopping and disengaging the engine.
Gear shift lever
Instructions for changing gears, including neutral and reverse operations.
Connection/disconnection of the cutting unit
How to engage and disengage the cutting unit drive for operation and transport.
Quick lifting/lowering of the cutting unit
Using the lever to quickly raise or lower the cutting unit for transport or obstacles.
Ignition Lock
Understanding the different positions of the ignition key for starting and stopping the engine.
Parking brake
How to engage and disengage the parking brake for securing the tractor.
Choke control (if equipped)
Operating the choke control for starting a cold engine.
4. Before starting.
Filling up
Proper procedure for filling the fuel tank with unleaded petrol, including safety precautions.
Oil level
Checking the Oil Level
Procedure to check and maintain the correct engine oil level using the dipstick.
5. Driving.
Starting of motor
Steps to safely start the tractor engine, including choke and ignition settings.
Driving
How to operate the tractor, including controlling the cutting unit and selecting driving speed.
Adjustment of the cutting unit
A. In the direction of travel
Adjusting the cutting unit for proper alignment with the tractor's direction of travel.
SIDE-TO-SIDE ADJUSTMENT
Adjusting the cutting unit for levelness relative to the ground.
6. Maintenance, adjustment.
Cleaning
Instructions on how to clean the tractor without using a high-pressure washer.
To service engine
Reference to engine manual and procedures for engine maintenance.
Oil drain valve
Procedure for draining engine oil using the valve and drain tube.
6. Blades
Blade Removal and Installation
Steps for removing, sharpening, and installing mower blades correctly.
6. Brakes
Brake Adjustment
Procedure for adjusting the brake lever to the correct distance for proper function.

Table of Contents

Save PDF